Bios Mods -The Best BIOS Update and Modification Source

Full Version: [REQUEST+REWARD] Add AES-NI support to IBM x3500 M3 firmware
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5 6
I made a dos bootable USB using Rufus 2.18

From dos I ran the command from amiflash\Aptio\afudos and got the following message:
Code:
46 - Error: Problem getting flash information.

I also tried amiflash\AMIBIOS\AFUDOS:

Code:
- Error: BIOS does not support AFU.


And lastly  amiflash\AptioV\afudos\AfuDos

Code:
46 - Error: Problem getting flash information.
0x13c is not 0x13r
(01-15-2018, 12:08 AM)DeathBringer Wrote: [ -> ]0x13c is not 0x13r

#facepalm.. sorry I'll try again.

I'm also writing a Windows USB with CPUZ and BIOS backup to try those too
Code:
ubuntu@ubuntu:~$ sudo rdmsr 0x13c
3
1. Download Intel ME System Tools v6 r2
2. Extract and copy files from \Intel ME System Tools v6 r2\Flash Programming Tool\DOS\ to USB stick with native DOS
3. Boot from bootable USB stick with native DOS
4. Run
fpt -bios -d old.rom
I need result file old.rom
Creating a windows bootable disc is a pain. I'm on my fourth attempt and it takes a long time to create the usb and then test if it'll boot.
(01-15-2018, 02:07 AM)DeathBringer Wrote: [ -> ]1. Download  Intel ME System Tools v6 r2
2. Extract and copy files from \Intel ME System Tools v6 r2\Flash Programming Tool\DOS\ to USB stick with native DOS
3. Boot from bootable USB stick with native DOS
4. Run
fpt -bios -d old.rom
I need result file old.rom

results:

Code:
C:\BIOS>fpt -bios -d old.rom

Intel (R) Flash Programming Tool. Version: 6.1.20.1057
Copyright (c) 2007-2010, Intel Corporation. All rights reserved.

Platform: ICH10

Error 201: [FPT.exe] cannot be run on the current platform.
Please contact your vendor.
Code:
C:\BIOS\V5>fpt -bios -d old.rom

-------------------------------------------------------------
Flash Programming Tool. Version 5.1.0.1167
Copyright (c) Intel Corporation. 2007-2008

Southbridge: ICH10
Reading file "fparts.txt" into memory...
Initializing SPI utilities
Reading HSFSTS register... Flash Descriptor: Invalid

        --- Flash Devices Found ---
Error 405: There are no supported SPI flash devices installed. Please check connectivity and orientation of SPI flash device.
C:\BIOS\V5>cd ..\V6
C:\BIOS\V6>fpt -bios -d old.rom

Intel (R) Flash Programming Tool. Version: 6.0.50.1252
Copyright (c) 2007-2010, Intel Corporation. All rights reserved.

Platform: ICH10

Error 201: [FPT.exe] cannot be run on the current platform.
Please contact your vendor.
Find BIOS chip on the motherboard and make a good photo of it.
Pages: 1 2 3 4 5 6