07-03-2018, 02:56 PM
07-03-2018, 03:13 PM
(07-03-2018, 02:56 PM)DeathBringer Wrote: [ -> ]Does it start without A2618_B1.OMF ?
Yup, it does. It even finished without it trouble free.
The order of flashing is next:
-D
-M
-C
-P6_Intel
And after that Sectors 00-14 begin.
07-03-2018, 03:30 PM
OK. Try other way.
1. Make flashing disk with BiosPack for D2618-Cx
2. Edit file AUTOEXEC.BAT: replace BIOFLASH /AUTO with BIOFLASH /NOAPI /AUTO
3. Copy mod2 of BIOFLASH.EXE
4. Boot and make photos of results.
if it fails then copy file A2618_B1.OMF with name A2618_C1.OMF
And boot again.
1. Make flashing disk with BiosPack for D2618-Cx
2. Edit file AUTOEXEC.BAT: replace BIOFLASH /AUTO with BIOFLASH /NOAPI /AUTO
3. Copy mod2 of BIOFLASH.EXE
4. Boot and make photos of results.
if it fails then copy file A2618_B1.OMF with name A2618_C1.OMF
And boot again.
07-03-2018, 11:10 PM
(07-03-2018, 03:30 PM)DeathBringer Wrote: [ -> ]OK. Try other way.
1. Make flashing disk with BiosPack for D2618-Cx
2. Edit file AUTOEXEC.BAT: replace BIOFLASH /AUTO with BIOFLASH /NOAPI /AUTO
3. Copy mod2 of BIOFLASH.EXE
4. Boot and make photos of results.
if it fails then copy file A2618_B1.OMF with name A2618_C1.OMF
And boot again.
It didn't fail, but posted warning.
Continue anyway?
07-03-2018, 11:57 PM
Try it.
07-04-2018, 12:00 AM
(07-03-2018, 03:30 PM)DeathBringer Wrote: [ -> ]OK. Try other way.
1. Make flashing disk with BiosPack for D2618-Cx
2. Edit file AUTOEXEC.BAT: replace BIOFLASH /AUTO with BIOFLASH /NOAPI /AUTO
3. Copy mod2 of BIOFLASH.EXE
4. Boot and make photos of results.
if it fails then copy file A2618_B1.OMF with name A2618_C1.OMF
And boot again.
Continued..
The result is the same as before. "Programm aborted" - file "Autoexec_Mod-BIOFm2-Continue".
Tried to substitute A2618_C1 with renamed A2618_B1 (ren-d as C1) - file "Autoexec_Mod-BIOFm2-A2618_BxRenAsCx".
No luck (
07-04-2018, 12:17 PM
1. Make flashing disk with BiosPack for D2618-Bx
2. Copy modded file D2618_C1.OCF to this disk. Rename it to D2618_B1.OCF
3. Boot, wait for error or message "Continue anyway (y/[n])", make a photo of results and press n.
2. Copy modded file D2618_C1.OCF to this disk. Rename it to D2618_B1.OCF
3. Boot, wait for error or message "Continue anyway (y/[n])", make a photo of results and press n.
08-14-2018, 09:03 AM
No feedback - no more help.