Bios Mods -The Best BIOS Update and Modification Source

I have been trying to inject microcode into the bios for the gateway zx6800 for a few days now and I have hit a dead end. would someone be willing to help me get the code injected?

here are the files https://www.dropbox.com/sh/dg8sm3o2vxs9s...cjt_a?dl=0

(07-09-2018, 10:38 AM)drew0987 Wrote: [ -> ]I have been trying to inject microcode into the bios for the gateway zx6800 for a few days now and I have hit a dead end. would someone be willing to help me get the code injected?

here are the files https://www.dropbox.com/sh/dg8sm3o2vxs9s...cjt_a?dl=0

Hi~~ try my mod here.
http://www.mediafire.com/file/cia0d1itj7...0.rar/file

(07-09-2018, 06:54 PM)genius239 Wrote: [ -> ]

(07-09-2018, 10:38 AM)drew0987 Wrote: [ -> ]I have been trying to inject microcode into the bios for the gateway zx6800 for a few days now and I have hit a dead end. would someone be willing to help me get the code injected?

here are the files https://www.dropbox.com/sh/dg8sm3o2vxs9s...cjt_a?dl=0

Hi~~ try my mod here.
http://www.mediafire.com/file/cia0d1itj7...0.rar/file

Thank you, i will try it tomorrow and let you know how it turned out. may i ask how you did it? I tried to do it myself for about a week on all sorts of different operating systems and software with no luck. Was I just using the wrong software (the files i had included in the shared folder)? This is the site that I used for instructions: https://www.delidded.com/how-to-update-c...enix-bios/

thanks again

It looks like it has worked perfectly, thank you very much.

(07-14-2018, 06:30 PM)drew0987 Wrote: [ -> ]It looks like it has worked perfectly, thank you very much.

Also test this one ,and check security tab after flashing.
http://www.mediafire.com/file/svmg394dg6...2.rar/file

(07-14-2018, 07:44 PM)genius239 Wrote: [ -> ]

(07-14-2018, 06:30 PM)drew0987 Wrote: [ -> ]It looks like it has worked perfectly, thank you very much.

Also test this one ,and check security tab after flashing.
http://www.mediafire.com/file/svmg394dg6...2.rar/file

Thanks and I like to know how you modify it.
Can you share the procedures and tools you have used to insert the microcode to your BIOS？

(07-14-2018, 08:26 PM)jsl2000 Wrote: [ -> ]

(07-14-2018, 07:44 PM)genius239 Wrote: [ -> ]

(07-14-2018, 06:30 PM)drew0987 Wrote: [ -> ]It looks like it has worked perfectly, thank you very much.

Also test this one ,and check security tab after flashing.
http://www.mediafire.com/file/svmg394dg6...2.rar/file

Thanks and I like to know how you modify it.
Can you share the procedures and tools you have used to insert the microcode to your BIOS？

Its a phoenix bios ,so you need phoenix bios editor to mod it.
When you open bios ,on the same folder has a temp folder that extract all module.
UPDATE00.ROM is mcode module on temp folder ,it didn't need re-checksum ,so you can replace mcode direct(suggest you don't change module size).

After replace new module you need use PBE build new bios.


.

(07-14-2018, 09:44 PM)genius239 Wrote: [ -> ]

(07-14-2018, 08:26 PM)jsl2000 Wrote: [ -> ]

(07-14-2018, 07:44 PM)genius239 Wrote: [ -> ]

(07-14-2018, 06:30 PM)drew0987 Wrote: [ -> ]It looks like it has worked perfectly, thank you very much.

Also test this one ,and check security tab after flashing.
http://www.mediafire.com/file/svmg394dg6...2.rar/file

Thanks and I like to know how you modify it.
Can you share the procedures and tools you have used to insert the microcode to your BIOS？

Its a phoenix bios ,so you need phoenix bios editor to mod it.
When you open bios ,on the same folder has a temp folder that extract all module.
UPDATE00.ROM is mcode module on temp folder ,it didn't need re-checksum ,so you can replace mcode direct(suggest you don't change module size).

After replace new module you need use PBE build new bios.


.

Thanks for your prompt and kind reply.
I'll try to follow your instruction to insert the microcode to my BIOS.