Bios Mods -The Best BIOS Update and Modification Source

Full Version: [Request]MSI MS-7594 (Intel G43+ICH10)AMI BIOS unlock AHCI Setting
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Please help me unlock/unhide this AMI BIOS AHCI Setting (MS-7594 Mainboard is a OEM prodoct for NEC PC-MY29/MK30R), I want to use SSD on it.

Thanks! Shy

BIOS Type: AMI BIOS (Legacy, non-UEFI)
BIOS Vsersion: 484a0600
BIOS Update date: 2012/04/24
BIOS Download site:
http://121ware.com/psp/PA121/121ETC2/CRM...modId=6216
I thought this looked familiar, and yes I answered you on Win-Raid forums.

There is no SATA AHCI settings to unlock, unless you want to disable certain SATA ports or enable/disable SMART. Plug in your SSD and go, the SATA ports are not in IDE mode, since the ports are named AHCI port0 and AHCI port1

Show me images of AHCI Port0 + AHCI Port1 page (inside main)
And image of Advanced >> Advanced Chipset Setup page

Those are the two places where AHCI/SATA settings are, if you are missing any I need to see images first before making things visible, so I know what you can see already.

There is no AHCI/RAID/IDE setting option, board is already in AHCI by default
(03-03-2019, 11:33 PM)Lost_N_BIOS Wrote: [ -> ]I thought this looked familiar, and yes I answered you on Win-Raid forums.  

There is no SATA AHCI settings to unlock, unless you want to disable certain SATA ports or enable/disable SMART. Plug in your SSD and go, the SATA ports are not in IDE mode, since the ports are named AHCI port0 and AHCI port1

Show me images of AHCI Port0 + AHCI Port1 page (inside main)
And image of Advanced >> Advanced Chipset Setup page

Those are the two places where AHCI/SATA settings are, if you are missing any I need to see images first before making things visible, so I know what you can see already.
There is no AHCI/RAID/IDE setting option, board is already in AHCI by default  

My mainboard uses the same bios and I think my mainboard does not have ahci mode.
My mainboard is NEC PC-MY22LAZR6 based on NEC MS-7410MA
I needed ahci mode to install hackintosh, I tried to install but because it did not support ahci macos was unable to recognize the hard drive.
[Image: fullsizeoutput-4.jpg]
[Image: fullsizeoutput-7.jpg]
[Image: fullsizeoutput-15.jpg]
[Image: fullsizeoutput-1b.jpg]
[Image: fullsizeoutput-18.jpg]
best online image hosting