03-20-2019, 07:56 PM
03-20-2019, 08:20 PM
i create, but i don`t know it`s normal or not
03-21-2019, 12:47 AM
Please flash stock unmodified BIOS via EZ Flash, then do the following and I can unlock for you.
Take some images of Advanced BIOS page, so I can see all subsections visible at stock, and inside each subsection too. Scroll up and down on all pages where you have to do that to see all settings. This way I can see what is visible for you by default and what needs to be made visible. I will also enable chipset for you too, for that, you'll need to compare BIOS vs AMIBCP or send me chipset images to further enable rest if anything missing (Or you can do via access to User on any still missing settings once chipset is enabled)
Check BIOS main page and see if ME FW version is shown, if not then download HWINFO64 and on the large window on left side, expand motherboard and find ME area, inside that get the ME Firmware version. Once you have that, go to this thread and in the section "C" download the matching ME System Tools Package (ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
https://www.win-raid.com/t596f39-Intel-Management-Engine-Drivers-Firmware-amp-System-Tools.html
Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder. Select that Win folder, hold shift and press right click, choose open command window here (Not power shell). At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin
Take some images of Advanced BIOS page, so I can see all subsections visible at stock, and inside each subsection too. Scroll up and down on all pages where you have to do that to see all settings. This way I can see what is visible for you by default and what needs to be made visible. I will also enable chipset for you too, for that, you'll need to compare BIOS vs AMIBCP or send me chipset images to further enable rest if anything missing (Or you can do via access to User on any still missing settings once chipset is enabled)
Check BIOS main page and see if ME FW version is shown, if not then download HWINFO64 and on the large window on left side, expand motherboard and find ME area, inside that get the ME Firmware version. Once you have that, go to this thread and in the section "C" download the matching ME System Tools Package (ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
https://www.win-raid.com/t596f39-Intel-Management-Engine-Drivers-Firmware-amp-System-Tools.html
Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder. Select that Win folder, hold shift and press right click, choose open command window here (Not power shell). At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin
03-21-2019, 08:16 PM
i have any trouble, all program write faill to load driver
bios on pc not modifed and installed final version
win10
run with admin
bios on pc not modifed and installed final version
win10
run with admin
03-21-2019, 10:18 PM
Sorry, I don't quite understand all you said. You flashed latest BIOS via EZ Flash, correct? If yes, good, thanks!
FPT must be ran as Admin CMD Prompt. Or, you can use files from DOS Folder on a USB Bootable DOS Stick
If you are stuck on Win10 and cannot easily get admin command prompt, and method I mentioned above does not work for you, here is some links that should help get CMD back on right click menu
https://www.windowscentral.com/how-add-c...ors-update
https://www.windowscentral.com/add-open-...windows-10
https://www.laptopmag.com/articles/open-...privileges
FPT must be ran as Admin CMD Prompt. Or, you can use files from DOS Folder on a USB Bootable DOS Stick
If you are stuck on Win10 and cannot easily get admin command prompt, and method I mentioned above does not work for you, here is some links that should help get CMD back on right click menu
https://www.windowscentral.com/how-add-c...ors-update
https://www.windowscentral.com/add-open-...windows-10
https://www.laptopmag.com/articles/open-...privileges