Bios Mods -The Best BIOS Update and Modification Source

Hello!, is possible to unlock/upgrade microcode to support Lynnfield CPUs? this is a OEM motherboard, i suppose it has a artificial limitation to support only clarkdale CPUs, when the Intel H55 supports all 1156 CPUs, if you found any other stuff to unlock in this bios it will be great!

last thing the ugly oem splash logo, could be removed?

PEGATRON IPMIP-H55-INSPUR Ver 1.02

motherboard is working fine with a core i5 650 (clarkdale)

i got a core i5 750 (Lynnfield) so i hope i can use it with this motherboard :-(


the bios is directly extracted from the Motherboard with AFUdos.

[attachment=16668]

[attachment=16669]

Make and post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with supported CPU.
Explain exactly what happens when you try to boot with your i5-750.
P.S. Unlocking and removing logo are offtopic in this section.

Hi!!! thanks for the fast response, when i try to boot with the i5 750 it turn on, and nothing happend no video, no beeps, just on and fans working. the i5 750 is working perfect in other motherboard


[attachment=16670]

this time i boot with a i3 550

[attachment=16671]

OK. Make and post a photo of this motherboard.

(05-04-2019, 09:22 AM)DeathBringer Wrote: [ -> ]OK. Make and post a photo of this motherboard.

ok, i disconnected the 4-pin atx cable before i take the photo

[attachment=16672]

[attachment=16673]

What's your graphics card?
Make a photo of a page of BIOS Advanced Chipset Features.

(05-04-2019, 09:31 AM)DeathBringer Wrote: [ -> ]What's your graphics card?
Make a photo of a page of BIOS Advanced Chipset Features.

i tested with a old xfx geforce 8600GT and a new geforce gtx 1070, the working system is this motherboard, i5 650, 8GB ram at 1333 with a gtx 1070 and a evga 600B PSU


[attachment=16674]

Make photos of available of values of last three setting.

(05-04-2019, 09:49 AM)DeathBringer Wrote: [ -> ]Make photos of available of values of last three setting.

here we go,

[attachment=16675][attachment=16676][attachment=16677]

Did you tried to change it to PCIE/PCI?