Check BIOS main page and see if ME FW version is shown, if not then download
HWINFO64 and on the large window on left side, expand motherboard and find ME area, inside that get the ME Firmware version. Once you have that, go to this thread and in the section "C" download the matching ME System Tools Package (ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
https://www.win-raid.com/t596f39-Intel-Management-Engine-Drivers-Firmware-amp-System-Tools.html
Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder. Select that Win folder, hold shift and press right click, choose open command window here (Not power shell). At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin
Right after you do that, try to write back the BIOS Region dump and see if you get any error, if you do show me image of the command entered and the error give >> FPTw.exe -bios -f biosreg.bin
If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)
https://www.windowscentral.com/how-add-c...ors-update
https://www.windowscentral.com/add-open-...windows-10
https://www.laptopmag.com/articles/open-...privileges
[attachment=16860 Wrote:Lost_N_BIOS pid='154821' dateline='1559498710']Check BIOS main page and see if ME FW version is shown, if not then download HWINFO64 and on the large window on left side, expand motherboard and find ME area, inside that get the ME Firmware version. Once you have that, go to this thread and in the section "C" download the matching ME System Tools Package (ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
https://www.win-raid.com/t596f39-Intel-Management-Engine-Drivers-Firmware-amp-System-Tools.html
Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder. Select that Win folder, hold shift and press right click, choose open command window here (Not power shell). At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin
Right after you do that, try to write back the BIOS Region dump and see if you get any error, if you do show me image of the command entered and the error give >> FPTw.exe -bios -f biosreg.bin
If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)
https://www.windowscentral.com/how-add-c...ors-update
https://www.windowscentral.com/add-open-...windows-10
https://www.laptopmag.com/articles/open-...privileges
Hi! Thanks for helping me!
I got the bios dump, but when I tried flashing it gave me the following error [
attachment=16860]
OK. Ill try ordering the stuff you mentioned once I get some money.
It's cheap (less than $7 total shipped), so hopefully you can order soon and then after long wait (3-5 weeks) they'll arrive and surprise you
(06-04-2019, 01:52 AM)Lost_N_BIOS Wrote: [ -> ]It's cheap (less than $7 total shipped), so hopefully you can order soon and then after long wait (3-5 weeks) they'll arrive and surprise you
Hi! I ordered the programmer today it will arrive in the next 2 weeks
Great! I just remembered something you can try that may work, it's a bug in some BIOS. Put the system to Sleep (S3) for one minute, then wake it up and try the FPT flash again. If it works, then we can flash in mod BIOS that way.
(06-08-2019, 10:19 PM)Lost_N_BIOS Wrote: [ -> ]Great! I just remembered something you can try that may work, it's a bug in some BIOS. Put the system to Sleep (S3) for one minute, then wake it up and try the FPT flash again. If it works, then we can flash in mod BIOS that way.
Hi! That didn't work either, got the same error. But good news The CH341A + Test clip arrived today, so waiting for insturctions!
[attachment=16958 Wrote:Lost_N_BIOS pid='155075' dateline='1560050343']Great! I just remembered something you can try that may work, it's a bug in some BIOS. Put the system to Sleep (S3) for one minute, then wake it up and try the FPT flash again. If it works, then we can flash in mod BIOS that way.
BTW, I made a fresh dump of my BIOS using Intel ME tools you provided earlier.
[
attachment=16958]