Bios Mods -The Best BIOS Update and Modification Source

Full Version: *Reward* HP Leonite: Quad Cores CPU Support
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

I currently have a HP computer with a HP Leonite Motherboard, which has a Core 2 Duo e6700 processor. The most it will support on the stock BIOS. I was wondering if anyone could take the time to add in the microcode for the q6600/q6700 processor, and I think it should be easy as they are both 1066mhz just like the board supports, both 65nm like the board supports, and both lga 775, like the board supports. And the chipset supports it too. I think it's just an issue where the microcode is not in. Since I am so desperate, anyone who can successfully get the q6600/q6700 working in that motherboard, can expect a generous donation up to $20.

Thank you for reading this thread and hopefully you can give me a solution.

(In case you did not guess that's not my real name)
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with supported CPU.
Thanks for your reply DeathBringer! I currently have the computer disassembled, here are some more detailed specs:

Processor: Intel Core 2 Duo E6700 (A Dual Core @ 2.66GHZ)

Motherboard: HP Leonite Motherboard (An LGA775 Motherboard)

RAM: 4GB Generic HP Memory (At 667MHZ)
(Just the ones that came with the computer)

Graphics Card: Zotac GT 1030 (2GB GDDR5)

Chipset: i945G (Should Support Quad Cores)

Thank you for replying and if you need any more information please let me know! :-)
945G chipset hasn't support for CPU with quad cores CPU.
Are you sure? It lists the Q6600 in the compatible cpu's list.
Try to find a prove.
Woah, ok.

If you say that it's not compatible, I believe you. You are the specialist, I'm the newbie, I just wanted you to double check.

Anyway, if 4 cores cannot be done, could the BIOS be unlocked to add overclocking options? I just want to squeeze any performance I can out of this motherboard.

I have also tried using Clockgen and SetFSB, but both only got the cpu about 0.1 - 0.2GHZ higher, and honestly the difference is not even noticeable.

Anyway, thanks for your replies and hopefully we can find a solution.
Unlocking is offtopic in this section.
Ok, well, I'll open a new thread in another forum, thanks for your help!