(08-22-2015, 11:15 AM)BDMaster Wrote: [ -> ]Here You go (version 38 2.01) :
http://rghost.net/7FVTqCSjp
You can Downgrade but error 280 remain !
Regards
Thanks BDMaster. So, do you mean there is no way to remove whitelist on G410/G510 for now?
hello not sure if I'm breaking any thread necro rules by posting here. if so sorry about that but It was already here so I figured better to use it.
anyway I just orderd a usb CH431A SPI programmer and I was wondering if you can use a universal bios back-up dump or if you need a dump from the programmer it self to do the mod? I'd also like to know if the cpu micro code can be updated to better support the i7-4610m and power saving for usb3.0 can be disabled?
Hi mate,
You have to make the Full Dump Firmware from MoBo's Eeprom Chips and
upload Them here then I will patch for You and make MicroCode Update too
if needs !
Then You will get the files to rewrite bak into Eeprom Chips !
Let me know
Regards
P.S. I can offer all support You need !
OK ready sorry it took so long the SOIC clip took forever to arrive from china.
bios chip:
25ro64A
13ECO
347044
CPUID signature:306C3
http://rghost.net/7tgXjrzNT
if not too much trouble see if bios contains DMA Remapping Table(dmar).
Hi mate,
I will give a look 1
Regards
if your still looking for the DMAR table I've confirmed it exists after a few searches I found out adia64 can detect it thanks anyway though.
ACPI Table Properties
ACPI Signature DMAR
Table Description DMA Remapping Table
Memory Address 9CFD8000h
Table Length 184 bytes
OEM ID LENOVO
OEM Table ID CB-01
OEM Revision 00000001h
Creator ID ACPI
Creator Revision 00040000h
that said I still need the advance tab + cpu microcode update if you feel like doing it. basically I'm planing to do a gpu passthrough in linux but it requires a lot of bios settings changes I don't have access to.
Ok mate,
We will give a chance . . .
Regards
Now I wll give a look to It !
Will update the Microcode and Remove whithelist fi possible Unlock Menu Tabs !
Regards
great looking forward to your results.