Hey guys,
I really love my VAIO Multi Flip but the fan makes me crazy. It just turns on to early. I think there is enough room for a higher temprature target for the fan. I have already seen some BIOS Mods from other VAIO Notebooks and there was a hidden settings where you could change the low and highlevel fan target.
Could someone just edit the BIOS that the hidden settings are enabled? Would be great if everything is unlocked.
Link to the BIOS download page:
BIOS DOWNLOAD
Thanks in advance!
nulldreinull
Is the attached bios file unlockable? (7zip file added .zip at the end otherwise it wouldn't let me upload) its from a SONY vaio - I am unable to make it work with the python script I get the following:
python j-bios.py -v R1130VA.ROM NEW.fd
Opened BIOS 'R1130VA.ROM' with md5:b11cde815eec33f0b165ab2335983f24
Operating on BIOS R1130VA.ROM size = 0x8741c8
Locating Firmware Volumes
Analysing FirmwareVolume@0x2c530!
FirmwareVolumeHeader ok!
Analysing Firmware Volume (may take a while!)
uncompLen: 0xc00010 (12582928)
Uncompressing LZMA section at 0x0002C590
Analysing FirmwareVolume@0x10!
FirmwareVolumeHeader ok!
Analysing Firmware Volume (may take a while!)
Traceback (most recent call last):
File "j-bios.py", line 2669, in <module>
main()
File "j-bios.py", line 2642, in main
bios = BIOS(infile)
File "j-bios.py", line 2338, in __init__
volumes = self.locate_firmware_volumes(0)
File "j-bios.py", line 2525, in locate_firmware_volumes
return [FirmwareVolume(index, pos, where) for pos in items]
File "j-bios.py", line 2157, in __init__
f = FFSFile(i, pos+offset, self.header.erasePolarity, self)
File "j-bios.py", line 2022, in __init__
s = FFSFileSection(i, pos+offset, self)
File "j-bios.py", line 1340, in __init__
self.subSections.append(FFSFileSection(self.uncompBufNum, 0, self))
File "j-bios.py", line 1776, in __init__
self.leafFV = FirmwareVolume(i, pos+offset-36, None, self)
File "j-bios.py", line 2157, in __init__
f = FFSFile(i, pos+offset, self.header.erasePolarity, self)
File "j-bios.py", line 2022, in __init__
s = FFSFileSection(i, pos+offset, self)
File "j-bios.py", line 1415, in __init__
stringtable = locate_stringtable(bb[i][start:end], verbose)
File "/home/robert/Downloads/j-bios/dumpsetup.py", line 82, in locate_stringtable
raise RuntimeError
RuntimeError
Hi!
I modify bios through H2OFFT-GUI-Wx64, i need to disable TDP lock. I modified it.
When i reboot after flashing the bios from windows, i got an error "insydeh20 secure flash error invalid firmware image". Current version of my bios is same as modified 1150VA. I dont know how to change, i put skip version check in flasher config.
What i need to do to flashing well?
Original and modified bios:
https://yadi.sk/d/Hsm3eUUv-UebJw
https://yadi.sk/d/Bb1T_pz8usmgfQ
Good afternoon, I am the owner of this device and with the help of an spi programmer I took a bios dump.
I tried to turn on amt in it and sew it back up, but it didn't work and everything remained as it is. I also tried to analyze the settings for accessing the hidden ones through IDA, but due to the paucity of knowledge, I could not complete the work.
I ask for help with unlocking hidden bios settings, enabling AMT support, and if there is a white list there, then disable it (I know the rules, but suddenly it will be easy).
I tried to enable these settings to install a new wi-fi ax210 board.
[
attachment=25682]