(04-13-2020, 02:39 AM)Dudu2002 Wrote: [ -> ]Hi
ATCrisis.fd
How you find this filename?
It does not works
Steps:
1. Get an empty pen drive.
2. Open Command Prompt (as Administrator).
3. Type: "Diskpart" (Without the commas; this is for all commands)
4. Note the number of the USB drive by typing: "List Disk"
5. Type: "Select Disk X" (Substitute Disk X with the number of your own USB disk. Be careful)
6. Type: "Clean" (This will wipe the pen drive so make sure you don't have any information you want to keep on it).
7. Type: "Create partition primary size=128" (This will create a 128MB partition on your pen drive)
8. Type: "Format fs=fat32 label=CD_Crisis"
9. Type: "Assign" and exit "Diskpart"
10. Put BIOS file to pen drive neamed: CD_Crisis.bin
11. Disconnect AC power.
12. Put pen drive in the USB 2.0 slot by the power socket.
13. Press and hold Fn + R keys
14. Plug in the AC power
15. Press power button. (because I hold Fn + R keys an orange light as side power connector blinking 5-6 times)
16. Pen drive in the USB 2.0 light blinking 2-3 times
17. Not success and reboot loop occur
It seem:- BIOS file name is not correct, so bios recovery (Fn + R) cant found it.
- or FAT32 file system can't load at this moment.
- or disconnect your CMOS battery is mandatory ( I didn't that because I think the recover process happen: Fn + R keys an orange light as side power connector blinking 5-6 times)
Can anybody Help me please?
(04-13-2020, 03:36 AM)mrhamed Wrote: [ -> ] (04-13-2020, 02:39 AM)Dudu2002 Wrote: [ -> ]Hi
ATCrisis.fd
How you find this filename?
It does not works
Steps:
1. Get an empty pen drive.
2. Open Command Prompt (as Administrator).
3. Type: "Diskpart" (Without the commas; this is for all commands)
4. Note the number of the USB drive by typing: "List Disk"
5. Type: "Select Disk X" (Substitute Disk X with the number of your own USB disk. Be careful)
6. Type: "Clean" (This will wipe the pen drive so make sure you don't have any information you want to keep on it).
7. Type: "Create partition primary size=128" (This will create a 128MB partition on your pen drive)
8. Type: "Format fs=fat32 label=CD_Crisis"
9. Type: "Assign" and exit "Diskpart"
10. Put BIOS file to pen drive neamed: CD_Crisis.bin
11. Disconnect AC power.
12. Put pen drive in the USB 2.0 slot by the power socket.
13. Press and hold Fn + R keys
14. Plug in the AC power
15. Press power button. (because I hold Fn + R keys an orange light as side power connector blinking 5-6 times)
16. Pen drive in the USB 2.0 light blinking 2-3 times
17. Not success and reboot loop occur
It seem:- BIOS file name is not correct, so bios recovery (Fn + R) cant found it.
- or FAT32 file system can't load at this moment.
- or disconnect your CMOS battery is mandatory ( I didn't that because I think the recover process happen: Fn + R keys an orange light as side power connector blinking 5-6 times)
Can anybody Help me please?
the information is contained in your bios...use the correct name
How I can search and find the correct filename with UEFITool, I searched
.fd and found 3 results, but can't understand what is it?
[
attachment=18558]
[
attachment=18559]
ok, I update UEFITool to UEFITool_NE_A57 and can access hex editor to find the offset's value
[
attachment=18560]
and pass my steps:
Steps:
1. Get an empty pen drive.
2. Open Command Prompt (as Administrator).
3. Type: "Diskpart" (Without the commas; this is for all commands)
4. Note the number of the USB drive by typing: "List Disk"
5. Type: "Select Disk X" (Substitute Disk X with the number of your own USB disk. Be careful)
6. Type: "Clean" (This will wipe the pen drive so make sure you don't have any information you want to keep on it).
7. Type: "Create partition primary size=128" (This will create a 128MB partition on your pen drive)
8. Type: "Format fs=fat32 label=CD_Crisis"
9. Type: "Assign" and exit "Diskpart"
10. Put BIOS file to pen drive neamed: CD_Crisis.bin
11. Disconnect AC power.
12. Put pen drive in the USB 2.0 slot by the power socket.
13. Press and hold Fn + R keys
14. Plug in the AC power
15. Press power button. (because I hold Fn + R keys an orange light as side power connector blinking 5-6 times)
16. Pen drive in the USB 2.0 light blinking 2-3 times
17. Not success and reboot loop occur
What is wrong ?! can you help me pleas!