Bios Mods -The Best BIOS Update and Modification Source - [REWARD] [REQUEST] Dell G7 15 7590 bios mod

I have a dell g7 15 7590 and an IC programer. I have managed to dump my bios which was correupted and get a good versions below. I am willing to pay $50 if you can unlock the bios options xmp, undervolting, and god forbid overclock the cpu to 4.5. Yes my cooling can handle it and I am not afraid to flash it myself with a ic programer

Ok to get better links now that I can actually see what I am typing, here are some links in order
(corrupted bios dump straight from the chip using ic programmer) https://drive.google.com/file/d/1x-5Ui8K...sp=sharing
(good bios dump from the manufacture which I flashed directly to my bios chip from another computer) https://drive.google.com/file/d/1_8gFnfm...sp=sharing
(notable extraction of the dell exe bios installer) https://drive.google.com/drive/folders/1...sp=sharing
(notable pull from the extracted bios with indications disabled features) https://drive.google.com/file/d/11md4vf7...sp=sharing
(what I did to unlock undervolting) https://www.reddit.com/r/Dell/comments/k...nd_remove/
I will post images of all the bios tabs later but suffice to say I have no overclocking menus at all and no ram profile menus either.

(02-04-2021, 11:38 PM)FriedTm Wrote: [ -> ]xmp

Possibly.

(02-04-2021, 11:38 PM)FriedTm Wrote: [ -> ]undervolting

Possibly. Platform Voltage Overrides setting exist.

(02-04-2021, 11:38 PM)FriedTm Wrote: [ -> ]overclock the cpu to 4.5

No multiplier management through the bios.

I'm willing to help you, but there is 1179 settings suppressions that should be changed manually. I prepared a test version of the mod both for flashing through IFPT and a full dump through the programmer. I didn't unlock absolutely everything, but only hidden tabs, that's why if I did it, and the mod turned out to be not working... You understand me.
I'll do what you wanted, if the test mod is successful.
5590&7590&7790_1.14.0_testunlock.zip

(02-05-2021, 05:02 AM)Maxinator500 Wrote: [ -> ]
(02-04-2021, 11:38 PM)FriedTm Wrote: [ -> ]xmp
Possibly.

(02-04-2021, 11:38 PM)FriedTm Wrote: [ -> ]undervolting
Possibly. Platform Voltage Overrides setting exist.

(02-04-2021, 11:38 PM)FriedTm Wrote: [ -> ]overclock the cpu to 4.5
No multiplier management through the bios.

I'm willing to help you, but there is 1179 settings suppressions that should be changed manually. I prepared a test version of the mod both for flashing through IFPT and a full dump through the programmer. I didn't unlock absolutely everything, but only hidden tabs, that's why if I did it, and the mod turned out to be not working... You understand me.
I'll do what you wanted, if the test mod is successful.
https://www.sendspace.com/file/342ahi

that download file you sent is giving me a "Windows could not automatically detect this network's proxy settings" after I click download. I tried through a few free proxies and I got the same issue. As for the rest, I know for a fact that Undervolting was in the bios in version 1.8 which was removed. I have been able to manually reactivate it myself using grub. As for xmp I know the board supports it, so even if you cant get it to show in bios getting it to run would be good enough.

here upload the file here, it will be open till the 9th and its a server I run https://mail.meatcupgames.org/s/zAWGwaa3jGQQt28

(02-05-2021, 03:06 PM)FriedTm Wrote: [ -> ]here upload the file here, it will be open till the 9th and its a server I run https://mail.meatcupgames.org/s/zAWGwaa3jGQQt28

I am getting the "could not upload" error.
New link: GDrive

Give me a few days and i will do it, kinda have the chip out of the board at the moment. I will tell you that the non flash solution did not work. As for uploading to that address its country sensitive i enabled ru but i can enable any you need Smile

(02-05-2021, 04:06 PM)Maxinator500 Wrote: [ -> ]
(02-05-2021, 03:06 PM)FriedTm Wrote: [ -> ]here upload the file here, it will be open till the 9th and its a server I run https://mail.meatcupgames.org/s/zAWGwaa3jGQQt28
I am getting the "could not upload" error.
New link: GDrive

Ok so I have done both methods suggested. The first one does nothing and the flashing puts it into bios recovery mode. This may be a dead end but I am still willing to pay if you can make a method to enable XMP. I used grub and I have even found the locations in the bios to change it however grub is limited to only setting a hex of two characters instead of three. This leaves me able to set xmp and do all the necessary steps but I cannon set the ram speed to anything other than zero. Which I tried and it worked, bricking my laptop with ram errors until I reflashed it. Sorry for the delay btw I got distracted at work, but I am really into seeing if I can get this to work so please let me know Smile

dude at this point I am about to rewrite grub setup_var_3 myself. This is crazy. Are you telling me there is no ability to change start up values which a size bigger than 2 places in hex?