Hello.
I need help. My laptop is Lenovo Ideapad 330 - 15ARR. While using laptop by my wife, she got pop up that bios need update. She agreed but during instalation new bios version, laptop was turned off against many warnings and orders to not do this. Now when I try turn it on I see black screen, power led on and after 10 second fan starts rotate. I tried disconnect and connect main battery, cmos battery, reseting by NOVO button. Tried also download newest version of bios from Lenovo site, extract .fd file, put on FAT32 USB but still nothing happend when turning on laptop. USB doesnt flash - i tried all buttons combination fn+esc, fn+r, windows+b etc. Is there any way to recover my motherboard? Thanks for reply.
Bios file from Lenovo site:
https://download.lenovo.com/consumer/mob...cn49ww.exe
(07-03-2021, 12:29 PM)vanvalu Wrote: [ -> ]Hello.
I need help. My laptop is Lenovo Ideapad 330 - 15ARR. While using laptop by my wife, she got pop up that bios need update. She agreed but during instalation new bios version, laptop was turned off against many warnings and orders to not do this. Now when I try turn it on I see black screen, power led on and after 10 second fan starts rotate. I tried disconnect and connect main battery, cmos battery, reseting by NOVO button. Tried also download newest version of bios from Lenovo site, extract .fd file, put on FAT32 USB but still nothing happend when turning on laptop. USB doesnt flash - i tried all buttons combination fn+esc, fn+r, windows+b etc. Is there any way to recover my motherboard? Thanks for reply.
Bios file from Lenovo site: https://download.lenovo.com/consumer/mob...cn49ww.exe
Hi
Are you sure this is a bios update for your laptop?
Use the serial number of your laptop to find on the Lenovo site update of your bios
I edited model name to 15ARR, now I am sure
I have a Lenovo ideapad 330S-15ARR (CPU:ADM ryzen 5 2500u).
It powers on and the CPU fan works.
However, the screen remains black and the BIOS won't start up.
The BIOS chip says winbond 25Q64FWSIQ 1821.
I obtained the following BIN file from the Internet, which was created from LENOVO's BIOS update EXE file.
I FLASH'd this BIN file into the BIOS using CH341A and AsProgrammer.
https://drive.google.com/file/d/154OFOLz...sp=sharing
The BIOS is now up and running.
However, as shown in the attached image, the ProductName, MTM, LENOVO SN, and UUID became INVALID.
Perhaps because the UUID has changed, I cannot activate the reinstalled Windows 10.
The BIOS backup before FALSH is in the following file.
https://drive.google.com/file/d/1IbrNsd5...sp=sharing
Other than this backup file, there is nothing else that shows the previous UUID, etc.
I want to migrate the previous ProductName, MTM, LENOVO SN and UUID so that the OS can activate the license.
Can someone please help me?
Thank you very much.
(07-31-2021, 11:55 AM)junkfoodcafe Wrote: [ -> ]I have a Lenovo ideapad 330S-15ARR (CPU:ADM ryzen 5 2500u).
It powers on and the CPU fan works.
However, the screen remains black and the BIOS won't start up.
The BIOS chip says winbond 25Q64FWSIQ 1821.
I obtained the following BIN file from the Internet, which was created from LENOVO's BIOS update EXE file.
I FLASH'd this BIN file into the BIOS using CH341A and AsProgrammer.
https://drive.google.com/file/d/154OFOLz...sp=sharing
The BIOS is now up and running.
However, as shown in the attached image, the ProductName, MTM, LENOVO SN, and UUID became INVALID.
Perhaps because the UUID has changed, I cannot activate the reinstalled Windows 10.
The BIOS backup before FALSH is in the following file.
https://drive.google.com/file/d/1IbrNsd5...sp=sharing
Other than this backup file, there is nothing else that shows the previous UUID, etc.
I want to migrate the previous ProductName, MTM, LENOVO SN and UUID so that the OS can activate the license.
Can someone please help me?
Thank you very much.
Hi
I responded to your message
Check your email messages
I have a Lenovo ideapad 330S-15ARR (CPU: ADM Ryzen 5 2500u).
It turns on and the CPU fan runs.
However, no video and BIOS will not boot.
The BIOS chip says winbond 25Q64FWSIQ 1821.
I downloaded the following BIN file from the Internet, AND FLASH put it into the BIOS using CH341A and CH341A Programmer.
and now the BIOS is up and running.
However, as identified in the attached image, ProductName, MTM, LENOVO SN and UUID are manufactured INVALID.
Maybe because the UUID has changed, I can't activate the reinstalled Windows 10.
follow the link to the files.
https://drive.google.com/drive/folders/1...sp=sharing
Besides this backup file, there is nothing else that shows the previous UUID, etc.
I want to migrate the previous ProductName, MTM, LENOVO SN and UUID so that the OS can activate the license.
Can someone please help me?