Hi , someone can response this request? i have a Fujitsu TEAMPOS 3600 that cannot boot with a Core 2 Quad processor , when it tries to read the processor name it shuts off , if you put a compatible processor and you send the pc into S4 and swap the processor with the core 2 quad will work normally . If you shut down the pc it will not work again (same symptom that i mentioned first)
i give you a actual working backup of the bios , it cannot be downloaded from the web , no info page for this non common computer
Tried to update the microcode and no luck . The bios already have the C2Q's microcode
Post a screenshot with Mainboard tab of CPU-Z.
Explain exactly what happens when you try to boot with your Core 2 Quad processor.
(12-21-2021, 12:38 PM)DeathBringer Wrote: [ -> ]Post a screenshot with Mainboard tab of CPU-Z.
Explain exactly what happens when you try to boot with your Core 2 Quad processor.
Check this link
https://drive.google.com/drive/folders/1...sp=sharing i left a video showing the behavior when a Quad Core is installed plus the CPU-Z motherboard Tab photo . Basically when the BIOS tries to get the "CPU Brand Name" string the PC shuts down
PD: can you notify to the admins the problem with the Reply/New Thread tool? it doesn't display correctly and is very difficult write replies . And tried to send the video as attachments and the system didn't let me
(12-21-2021, 12:47 AM)jao6622 Wrote: [ -> ]i give you a actual working backup of the bios
Try to backup BIOS in native DOS:
awdflash backup.bin /pn /sy /e
or
awdflash firmware.bin backup.bin /pn /sy /e
(12-22-2021, 12:04 AM)jao6622 Wrote: [ -> ]PD: can you notify to the admins the problem with the Reply/New Thread tool?
Try this -
https://www.bios-mods.com/forum/Thread-P...#pid177671
(12-22-2021, 03:08 PM)DeathBringer Wrote: [ -> ] (12-21-2021, 12:47 AM)jao6622 Wrote: [ -> ]i give you a actual working backup of the bios
Try to backup BIOS in native DOS:
awdflash backup.bin /pn /sy /e
or
awdflash firmware.bin backup.bin /pn /sy /e
(12-22-2021, 12:04 AM)jao6622 Wrote: [ -> ]PD: can you notify to the admins the problem with the Reply/New Thread tool?
Try this - https://www.bios-mods.com/forum/Thread-P...#pid177671
Hi, what version of awdflash i should use? tried 899 and it doesn't backup anything , only does some beepings and closes, The main rom that i left in the post was backupped with FlashRom , i can confirm that it works because i did some mods into bios and flashed OK . That one that i left is a fresh one , the first backup that i did to this POS PC
(12-23-2021, 11:01 AM)jao6622 Wrote: [ -> ]Hi, what version of awdflash i should use? tried 899 and it doesn't backup anything , only does some beepings and closes,
Can you make a video of this process?
BTW: What's your compatible CPU?
(12-23-2021, 02:32 PM)DeathBringer Wrote: [ -> ] (12-23-2021, 11:01 AM)jao6622 Wrote: [ -> ]Hi, what version of awdflash i should use? tried 899 and it doesn't backup anything , only does some beepings and closes,
Can you make a video of this process?
BTW: What's your compatible CPU?
Hi , here is the video of the beeping reaction (the one that starts with "Copy of") . just made a .bat with your supplied command line
https://drive.google.com/drive/u/1/folde...5SSFcTkj4d
i'm actually using a Intel Core 2 Duo E8500
PD: i have a bios programmer too if anything get messed