Hi, I have a K9N6PGM2-V with a phenom II X4 945... but the 125W version, so it automatically puts the voltage at minimum, with CPUTweaker I can get 2.5 GHz, but... I would like to have OC options in BIOS.
(FSB is not needed but it's preferably)
Many thanks and blesses.
Hey,
Thanks for your post. Please post a BIOS link so we can help you out.
Thanks,
TheWiz
(06-18-2010, 11:10 PM)TheWiz Wrote: [ -> ]Hey,
Thanks for your post. Please post a BIOS link so we can help you out.
Thanks,
TheWiz
http://www.msi.com/index.php?func=downloadfile&dno=11193&type=bios
Notes:
I's a MSI board
AMI BIOS
Ver. 9.9
And many thanks. Blesses again!!!
Hey zoteman94,
I have looked over your BIOS and there is nothing to unlock. However I am not quite sure what you were hping to gain. You have all the retail BIOS settings, and overclocking can be found under Frequency/Voltage Control.
Thanks,
TheWiz
In Frequency/Voltage Control I can't access the voltage and multiplier of the CPU, the RAM voltage or the FSB neither. Only the RAM freq. =(
Try pressing Ctrl Home , Ctrl F1 or Ctrl F9 in the BIOS. It has been discovered that some motherboards require this key combination in order to display all advanced settings.
And CPU Multiplier is not changeable , unless you have an Intel Exterem or AMD Black Edition CPU
(06-19-2010, 08:35 PM)1234s282 Wrote: [ -> ]And CPU Multiplier is not changeable
Yes, but only lower multipliers (like in my case that have 12.5 of 15 in windows OC programs)
And thank you for the help I'll try it.
(06-20-2010, 11:05 AM)zoteman94 Wrote: [ -> ] (06-19-2010, 08:35 PM)1234s282 Wrote: [ -> ]And CPU Multiplier is not changeable
Yes, but only lower multipliers (like in my case that have 12.5 of 15 in windows OC programs)
And thank you for the help I'll try it.
im wondering if that modded ami bios for the nettle2/3 boards we had would work on this one.. looks like it uses the same chip set. I downloaded the manual for this, its kinda funny.. has ami bios screen shots, but mentions award bios in the manual. has all these strange warnings scattered about, like "this board will is not compatible with win98" lol.
Nick