Bios Mods -The Best BIOS Update and Modification Source

Full Version: Biostar TA785GE 128M 6.1 HP 2.1 SLIC
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

Could you mod this bios for me?

Manufacturer: Biostar.
Model: TA785GE 128M 6.1
Bios link:
Second bios link:
Slic reqest: Dell 2.1

The problem is that AMItool says -- cannot extract 1b module.

I have also attached a bios extracted from the board.

Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Thanks -- works perfectly. Donation made



1. how did you overcome the 1b module issue with amitool?

2. Also see this post:


(imitation is the best form of praise/ flattery)