Bios Mods -The Best BIOS Update and Modification Source

Full Version: HP OEM Asus A8M2N-LA v5.07 HP 2.1 SLIC
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi guys if somone can do a slic 2.1 for this that would totally rock thanks


Computer model: HP Pavilion Media Center TV m7750n Desktop PC
Bios: ftp.ftp.hp.com/pub/softlib/software9/COL20754/pv-54579-1/sp35159.exe
Mainboard: A8M2N-LA ver 5.07
Bios Type: Award

Thanks very miuch

Sam
Seeing as totally rocking is our priority here............................ Big Grin

Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/HP%20OEM%...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin
(08-22-2010, 07:28 AM)1234s282 Wrote: [ -> ]Seeing as totally rocking is our priority here............................ Big Grin

Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/HP%20OEM%...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

WOW thanks so much this is awesome.. i thought id have to wait.. Big Grin this rocks works like a camp..
(08-22-2010, 10:03 AM)Elite2k Wrote: [ -> ]
(08-22-2010, 07:28 AM)1234s282 Wrote: [ -> ]Seeing as totally rocking is our priority here............................ Big Grin

Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/HP%20OEM%...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

WOW thanks so much this is awesome.. i thought id have to wait.. Big Grin this rocks works like a camp..


I get a 99999 error. Is there a prodedure I am missing? Ran as Administrator from the Administrator acct?
Flash from DOS with AwardFlash !!!!!!!!!
(02-16-2011, 09:32 PM)fcreeves Wrote: [ -> ]
(08-22-2010, 10:03 AM)Elite2k Wrote: [ -> ]
(08-22-2010, 07:28 AM)1234s282 Wrote: [ -> ]Seeing as totally rocking is our priority here............................ Big Grin

Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/HP%20OEM%...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

WOW thanks so much this is awesome.. i thought id have to wait.. Big Grin this rocks works like a camp..


I get a 99999 error. Is there a prodedure I am missing? Ran as Administrator from the Administrator acct?

Any chance to get hold of the bios file?? Wold be nice Smile thanks in advance
(08-22-2010, 07:28 AM)1234s282 Wrote: [ -> ]http://dl.dropbox.com/u/747181/HP%20OEM%...34s282.zip
Hi,

Is there a current working link for this update?