Dear Modder,
Can someone add SLIC 2.1 to this BIOS :
SLIC: Gigabyte 2.1
Cert: Gigabyte
Quote:Manufacturer : Gigabyte
Motherboard : Gigabyte GA-G41M-ES2L(rev. 1.0)
BIOS Ver : F9
BIOS Type : Award
BIOS Link :
http://download.gigabyte.asia/FileList/B...s2l_f9.exe
Thank you.
Here you go , i used Gigabyte 2.1 SLIC + Certificate Included:-
1. Copy and paste ******.XRM-MS certificate file into C-Drive.
2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.
3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.
4. After receiving the message that the license was installed successfully, type at the command prompt:
slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.
5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.
http://dl.dropbox.com/u/747181/Gigabyte%...34s282.zip
Flash at your own risk!
Please Report Back With Whether It Worked Or Not!
Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work
Regards
Admin
thank you vey much .. will give it ago and let you know if it works ..
Was wondering does this have to be done each time windows is installed or can it be just flashed to bios so that its there permanently as i noticed in the zip there is
autoexec.bat
flashspi.exe
g41mes2l.f9
GIGABYTE-GBT-2.1.XRM-MS
But in the instructions above it doesant mention about the autoexec or flashspi and the g41mes2l.f9
if someone could give instructions for this
Any chance someone could help me on this?
Tried this and works perfectly
thanks
(08-30-2010, 05:09 AM)1234s282 Wrote: [ -> ]Here you go , i used Gigabyte 2.1 SLIC + Certificate Included:-
1. Copy and paste ******.XRM-MS certificate file into C-Drive.
2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.
3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.
4. After receiving the message that the license was installed successfully, type at the command prompt:
slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.
5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.
http://dl.dropbox.com/u/747181/Gigabyte%...34s282.zip
Flash at your own risk!
Please Report Back With Whether It Worked Or Not!
Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work
Regards
Admin
Could you please provide new link? thanks!