Bios Mods -The Best BIOS Update and Modification Source

i got my 2gb flash drive formated to Fat32 and i make it bootable with the win98 files and then i added the AMIBOOT.ROM fille

it will blink for about 5 seconds then i hear 4 beeps

the only problem is when i turn it on there is no video but i dont hear the power on beeps i used to hear

did it work or did it not work?

i had the original stock bios once apon a time and then i flashed the custom bios you guys made and it worked fine

then i tried to flash the BIOS that i had backed up (from the rom with a rom dumper) to restore it to default and i forgot to unblock the file and i used a windows based flasher (forgot what i used)
but when i flashed it i made SURE that the BOOT Block was NOT flashed im not sure about the last block if i flashed it or not

now which bios should i flash?

the stock ones that messed it up
or the custom ones that worked?

i would use the custom ones that you know already worked and make sure you flash using the USB - never flash in Windows

and if the modded one works , why on earth would you want the stock one back? lol

Best of luck!
Admin

(10-15-2010, 11:30 PM)1234s282 Wrote: [ -> ]i would use the custom ones that you know already worked and make sure you flash using the USB - never flash in Windows

and if the modded one works , why on earth would you want the stock one back? lol

Best of luck!
Admin

well i have a functioning Boot Block becuase th epower and hdd light light up and i can hear the drive spinning but there is no video signal at all how would i go about replacing the system block?

i made a bat file for use with a bootable flash drive with win 98 startup stuff and i have afudos here is the batch file would it work and not cause more harm?

AFUDOS G123GD.ROM /O /X /P /N /C /E /K /Q /L3 /REBOOT

my bios chip looks like this

http://img718.imageshack.us/i/hotflash05.jpg/

NOT MY ACTUAL BIOS

just the same size chip and pins

you guys say that you are here to help but you wont even answer the rest of my questions

WHAT FORMAT DOES THE FLASH DRIVE NEED TO BE IN?

DOES IT NEED TO BE BOOTABLE

IS THERE SAPPOSED TO BE A SPECIFIC ATTRIBUTE SET? SUCH AS READ ONLY COMPRESSION WHICH ATTRIBUTES NEED TO BE SET TO WHAT?