Bios Mods -The Best BIOS Update and Modification Source

[

size=medium]Request Dell Inspiron 1520 Modified BIOS A09 to SLIC 2.1[/size]

I have a Dell Insprion with BIOS version A09. Does any one know a link to where I can download a modified bios file to update the bios to be SLIC2.1 compliant. I want to sucessfully install & activate my OEM copy of Dell windows 7 ultimate 64bit urgently
The link to the original bios file can be found below:

http://support.euro.dell.com/support/dow....aspx?c=uk&cs=ukdhs1&l=en&s=dhs&releaseid=R192439&SystemID=INS_PNT_PM_1520&servicetag=&os=BIOSA&osl=en&deviceid=12915&devlib=0&typecnt=0&vercnt=6&catid=-1&impid=-1&formatcnt=0&libid=1&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=264345

Also a link to the procedure how to sucessfully flash the MB would be also of help too

Hope someone out here can be of assisstance. Thanks in advance for any replies

Sorry to delete the other post you made but that one was in the wrong section!

Here you go , i used Dell 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Dell%20In...34s282.ZIP

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

Please Re-post

Thank You in advance

M156

(11-06-2010, 03:07 AM)1234s282 Wrote: [ -> ]Sorry to delete the other post you made but that one was in the wrong section!

Here you go , i used Dell 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Dell%20In...34s282.ZIP

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

ardnstiff

1234s282

machine156