Hi! I would be very greatfull if someone would help me to mod my bios with slic 2.1 so I can get a fine win7 install.
I found this on the net but i found several HP-cert and i dont know what to use:
<---->
Manufacturer: Asus
Model: K8N-E Deluxe
Version: ver. 1012.007
Bios Type: AMI
SLP: slp=HP
SLIC: slic=HP
Link:
http://www.fileden.com/files/2008/8/13/2...IC_SLP.rar
Modder: 911medic
Tester: stu222
Method: ssv3
<----->
The BIOS 1012.007 2006/02/14 is a beta but werified to work and also the last ASUS released for this MB. If that BIOS not work to modified the BIOS 1011 will do but that dont support large HD.
Sorry for not finding direct downloadlinks but here are all bios:
http://www.asus.com/product.aspx?P_ID=nYJlT1ztLMobrSz6&content=download
If you know what cert match the bios i found that maby work unless I would be very greatfull if you can help me out with this.
Either
http://dl.dropbox.com/u/747181/COMPAQHP-...2.1.XRM-MS or
http://dl.dropbox.com/u/747181/HP-HP-2.1.XRM-MS
1. Copy and paste ******.XRM-MS certificate file into C-Drive.
2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.
3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.
4. After receiving the message that the license was installed successfully, type at the command prompt:
slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.
5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.
Regards
Admin
(12-04-2010, 05:07 AM)1234s282 Wrote: [ -> ]Either http://dl.dropbox.com/u/747181/COMPAQHP-...2.1.XRM-MS or http://dl.dropbox.com/u/747181/HP-HP-2.1.XRM-MS
1. Copy and paste ******.XRM-MS certificate file into C-Drive.
2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.
3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.
4. After receiving the message that the license was installed successfully, type at the command prompt:
slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.
5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.
Regards
Admin
Thank you for being helpful, I will test this soon and will be back and tell if it works or not
Thanks again, I tesdet it and the cert: COMPAQHP-HPQOEM-2.1.XRM-MS woked.