(10-20-2013, 02:10 AM)mermalion Wrote: [ -> ]I have recently purchased a Tyan S3992 (non-e) and would like to get 6-core support. I'm wondering if anyone has made progress on this? It would be greatly appreciated.
Haven't tried 6-core cpus, but I'm using a couple of 8389s without any problems.
(03-31-2011, 06:49 PM)1234s282 Wrote: [ -> ]Try this at your own risk , i replaced all the microcode in the S3992 with the microcode from the latest S3992-E BIOS 
http://dl.dropbox.com/u/747181/Tyan%20S3...34s282.zip
Regards and Good Luck!
Admin
Halo,
Ich moechte diese entwickelte BIOS auch bekommen. Haben Sie Moeglichkeit diese BIOS noch einmail anzubieten?
Vielen Dank im voraus
Patch the Microcode module is not a solution.
i tried it many times on my KFN32-D SLI, but i hang at postcode D0 (with Microcode Updation off) or FF (with Default BIOS Settings).
Now, i tried to change the 1B Module with a similar board: KFSN5-D/IST
(Working CPU: 2358SE Quadcore, Not Working: 2419 Sixcore)
(02-07-2015, 02:12 PM)crazycusti Wrote: [ -> ]Patch the Microcode module is not a solution.
i tried it many times on my KFN32-D SLI, but i hang at postcode D0 (with Microcode Updation off) or FF (with Default BIOS Settings).
Now, i tried to change the 1B Module with a similar board: KFSN5-D/IST
(Working CPU: 2358SE Quadcore, Not Working: 2419 Sixcore)
replace the 1B module was a bad idea
with the 2358se i hang at D9 (copy mainbios to shadow ram)
with the 2419 i hang at FF (first D0 than FF)
so forget about the 1B module, this is not the right way.