07-22-2011, 09:13 AM
07-22-2011, 09:23 AM
HI ,
i have checked your bios file and it contains no overclocking options .
i found the AMD hidden menu and it contains options about chipset control , sata , pci ......etc but no overclocking options found .
do you want to unlock the AMD menu !
i have checked your bios file and it contains no overclocking options .
i found the AMD hidden menu and it contains options about chipset control , sata , pci ......etc but no overclocking options found .
do you want to unlock the AMD menu !
07-22-2011, 10:56 AM
(07-22-2011, 09:23 AM)AHMED HOSSAM Wrote: [ -> ]HI ,
i have checked your bios file and it contains no overclocking options .
i found the AMD hidden menu and it contains options about chipset control , sata , pci ......etc but no overclocking options found .
do you want to unlock the AMD menu !
thanks my friend, please unlock them.
07-24-2011, 04:41 AM
thankyou
07-24-2011, 05:56 PM
HI ,
here is your modified bios image with unlocked AMD tab in the setup utility .
[attachment=2349]
please flash it from dos and i`m waiting your reply after flashing it
here is your modified bios image with unlocked AMD tab in the setup utility .
[attachment=2349]
please flash it from dos and i`m waiting your reply after flashing it
07-25-2011, 08:52 AM
blue screen when winflash
07-25-2011, 05:27 PM
don`t use winflash when flashing your modified bios , just use the PHLASH.EXE that comes with your original bios files and flash from dos using a bootable usb-stick .
08-04-2011, 01:06 PM
HI ,
have you flashed the modified bios !
please tell me if this worked well .
have you flashed the modified bios !
please tell me if this worked well .
08-13-2011, 08:50 AM
dear sir, my netbook was broken down. I dont know which step is wrong.
08-13-2011, 03:51 PM
(08-13-2011, 08:50 AM)videojeff Wrote: [ -> ]dear sir, my netbook was broken down. I dont know which step is wrong.
don`t worry , use this crisis disk and it will boot again normally.
[attachment=2505]
1 ) CREATE THE CRISIS DISK USING 2GB FAT USB STICK .
2 ) PLUG AC POWER AND BATTERY THEN PRES FN AND ESC ( KEEP PRESSING IT ) THEN POWER ON AND DON`T MOVE YOUR HANDS FROM FN+ESC TILL YOU SEE THE USB LED TURNING ON AND OFF .
3 ) THE USB LED SHOULD BE TURNING ON AND OFF FOR ABOUT 5 TO 10 MINUTES THEN IT WILL RESTART AND BOOT NORMALLY .
TRY THIS AND TELL ME IF IT WORKED WELL .