Tried myself, not tested!
Dell2 2.1 SLIC + Certificate Included:-
1. Copy and paste ******.XRM-MS certificate file into C-Drive.
2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.
3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.
4. After receiving the message that the license was installed successfully, type at the command prompt:
slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.
5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.
http://dl.dropbox.com/u/19761158/Optiple...9_SLIC.zip
Flash at your own risk!
(08-10-2011, 11:46 AM)andre_ars Wrote: [ -> ]Tried myself, not tested!
Dell2 2.1 SLIC + Certificate Included:-
1. Copy and paste ******.XRM-MS certificate file into C-Drive.
2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.
3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.
4. After receiving the message that the license was installed successfully, type at the command prompt:
slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.
5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.
http://dl.dropbox.com/u/19761158/Optiple...9_SLIC.zip
Flash at your own risk!
Today, 16 August, i flash my Optiplex 755, insert a big Sata HD (was 80 Gb i put 500 Gb), and works just fine.
Thank you very much André.
Are these BIOS available from Dell, or are they modified. I'm running V21 now. Is the slic2.1 not included in the dell version?
(10-15-2012, 08:10 AM)arkrank Wrote: [ -> ]Are these BIOS available from Dell, or are they modified. I'm running V21 now. Is the slic2.1 not included in the dell version?
Bios mod ver A21: DELL_OptiPlex_755_A21_SLIC 2.1
http://rghost.net/41121039
thanks - quite amazing this works.
I wasn't sure from the instructions about when to apply the BIOS update - maybe others will be similarly uncertain. Worked fine when I did that after the other steps listed.
cheers! Geoff
... meant to say I had only the code from the bottom of the Windows 7 System screen (after right click Computer). I used
http://d-fault.nl/Keys.aspx to get a product key that corresponded to that code, used that on the steps specified. Maybe that helps someone...
(10-23-2012, 10:07 PM)sovem Wrote: [ -> ] (10-15-2012, 08:10 AM)arkrank Wrote: [ -> ]Are these BIOS available from Dell, or are they modified. I'm running V21 now. Is the slic2.1 not included in the dell version?
Bios mod ver A21: DELL_OptiPlex_755_A21_SLIC 2.1
http://rghost.net/41121039
It says this file deleted, also i think the optiplex 775 is now on version 22. By any chance is any one able to update with version 22?