Hi,
I wish to change the wireless lan card, but if I change it to one the cards I wish, I got an error and the notebook stop booting... I hope that someone could help me and change the biosfile or could show me how to change it.
Thanks for your help and sorry for my bad english...
-Manufacturer: Lenovo
-Model: IdeaPad z360 - 0912
-Bios revision: 35CN22WW
-Bios Type: Phoenix
-Bios Download Link:
http://download.lenovo.com/UserFiles/Dri...22WW64.exe
Current card:Atheros AR9285 Wireless Network Adapter
(PCI\VEN_168C&DEV_002B&SUBSYS_30A117AA&REV_01)
Desired Card: Intel WLAN 4965AGN MM2 or Intel WiFi Link 1000
Uploading now non whitelisted bios, find it in second HERE of my signature. Test it and tell me
Hi,
Thanks for your work, but sadly it didn't work for me. I could flash the BIOS, but after that the Notebook shut off after POST screens. I load the Bios default Settings and all works fine. Than I change to the Intel Wifi Link 1000 Card and also got the Error Messages to check my wifi card and the Notebook stop booting.
could you please check the BIOS again? Could I send you more information to help?
Best regards.
What is the error message?
the Messages are:
ERROR
Error! Not support wireless LAN in system.
Please turn oft system and check your wireless LAN device.
I also test it with the Intel 4965 card.
hmmmm, it's strange, i'm sure i removed whitelist check.
Anyway, i made another try from scratch, so delete old file and test new one.
I'm afraid, but didn't work :-(
I got again that Error message above and I only could Power off...
Something thats seems not normal after flashing the Notebook reboot, go on and go off than it goes on and Boot normally.
I upload the logfile from the flashprogram, perhaps it could help ?
http://www.mediafire.com/?id8k62lycssadu2
I also extract some Information wie "RW" about the Wireless LAN Card:
Device/Vendor ID 0x002B168C
Revision ID 0x01
Class Code 0x028000
Cacheline Size 0x10
Latency Timer 0x00
Interrupt Pin INTA
Interrupt Line IRQ17
BAR1 0xF0500004
BAR2 0x00000000
BAR3 0x00000000
BAR4 0x00000000
BAR5 0x00000000
BAR6 0x00000000
Expansion ROM 0x00000000
Subsystem ID 0x30A117AA
Hi, I check the label of the original WLAN-card.
There was named another model.
It was named as ANATEL ATH-AR5B95 or small as Atheros AR5B95. There were also many other IDs could it help if I write all information down or uploading an photo?
Edit:
Could you change the Whitelist-ID to the following?
PCI\VEN_8086&DEV_0083&SUBSYS_13058086&REV_00
Edit - 2:
I change the Whitelist Hardware-IDs by my self and it works fine! :-)
Is to remove the whitelist also easy ? could someone shortly tell me howto?
For removing the whitelist you need to hexedit a file too, but you need before to disassemble it and look for the code that checks that IDs on the list then figure out how to modify it to always return like if a value in that list matched.
That's quite different exchanging an ID to be recognised and completely remove whitelist checks.
But hey! try and if you manage to do it help me with requests in this section
What a pitty, I thought I have only to fill the ids with 0 or F ...
Okay... What program did you use for disassemble? w32dasm89 ?