Bios Mods -The Best BIOS Update and Modification Source

Full Version: BIOS DELL Studio 1749
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3
OK , we will fix this now .

try flashing using this bios file :-

http://www.mediafire.com/?dhh65hnpi3azeum

its the original bios file extracted from the exe .

- if the bios was flashed successfully from DOS , then the tools i used built the bios with errors .
- if you still can`t flash from DOS , then my mod is good and i will tell you another method .
It seems it is the tools are the problem. I can't flash it.
Same problem from before.
so , you can`t flash the original bios which i posted in my previous post !!
this don`t mean its tools problem as the phlash16 can`t even flash the original bios .

can you tell me please the version and the date of this bios so i can modify them to be able to flash from windows !
this mod will take just 10 minutes and will upload it here .
Well I tried phlash, phlash16, and ph1614 with no luck.

Date: 3/30/2011
Version: A08
The bios has some problems as the tool can`t build the new mod with modified date ans version .
rename the bios file to bios.wph then
try using phlash16.exe with this command :

phlash16 /s /x /force

and tell me the results for flashing the original bios with this command .
/force is not a parameter of the flash program.
I tried with just /s /x but still have the same problem.
no , force is a known parameter in phlash16.exe and i use it .

BTW , i will try modifying the date and version again and upload the mod here tomorrow .
(10-07-2011, 07:51 PM)AHMED HOSSAM Wrote: [ -> ]no , force is a known parameter in phlash16.exe and i use it .

BTW , i will try modifying the date and version again and upload the mod here tomorrow .

I tried the /force but that was the only parameter that wouldnt work.
I'll try again.

UPDATE: I think I have a old version of the flash utility. I tried getting another, and it gave me an error while loading the rom.
"Flash Driver Interface too big"
Can you upload your version of the phlash16?
Alright it seems I had a different version of phlash of what I needed.
I found the correct version. And it worked!
My bios is now modded, I have lots of new sub menus.
I did:
phlash16 /s /x /force bios_n.wph

Here is the version that worked for me:
http://www.mediafire.com/?t5aww04d9iszweg

Thanks a lot for your help
So , you flashed the modified bios and it worked .
Thanks for your feedback .
Pages: 1 2 3