10-29-2011, 04:14 PM
Xp cannot install over ahci if you don't integrate ahci drivers with nlite or load from floppy with F6 when the xp installation cd ask if you want to add more scsi drivers on boot time.
10-29-2011, 04:14 PM
10-29-2011, 05:50 PM
10-29-2011, 06:48 PM
ufff, this is by far the heaviest mod i made on an Insyde menu. The options you wanted were in the debug form that caused the problem in the first mod. So i had to make an exercise of mind to find a way to move the options out of that form.
What i have done is remove main menu (mostly), only saved the options to change time and date, and merge that options with the complete video configuration form, which is what you will see instead of Main in the tabs.
Don't know how safety is this one to be tested, as always but this time even more
... AT YOUR OWN RISK. I rechecked all 3 times so the new created menu was not corrupted, so... if you are brave enough to test your request... here it is.
http://dl.dropbox.com/u/45117524/bios-mo...miloml.exe
I wait your news, IMPATIENTLY
What i have done is remove main menu (mostly), only saved the options to change time and date, and merge that options with the complete video configuration form, which is what you will see instead of Main in the tabs.
Don't know how safety is this one to be tested, as always but this time even more
... AT YOUR OWN RISK. I rechecked all 3 times so the new created menu was not corrupted, so... if you are brave enough to test your request... here it is.http://dl.dropbox.com/u/45117524/bios-mo...miloml.exe
I wait your news, IMPATIENTLY
10-30-2011, 03:21 PM
Hello,
Sorry for delay I was not expecting a new test
BIOS flashes fine, upon entering BIOS there is a new "Video configuration" form (very first tab) - Sadly it is empty.
Also, it is not possible to move around in the BIOS and access other forms, also none of the keyboard shortcuts work (exiting etc)
Happily windows still loads so no damage done
Sorry for delay I was not expecting a new test
BIOS flashes fine, upon entering BIOS there is a new "Video configuration" form (very first tab) - Sadly it is empty.
Also, it is not possible to move around in the BIOS and access other forms, also none of the keyboard shortcuts work (exiting etc)
Happily windows still loads so no damage done
10-30-2011, 05:21 PM
Ok will try to do it better next time. 
10-31-2011, 08:02 AM
camiloml do you have any ideea why hardware virtualization is not working? It is enable but it`s not working? 
10-31-2011, 10:00 AM
(10-31-2011, 08:02 AM)bci24sg22 Wrote: [ -> ]camiloml do you have any ideea why hardware virtualization is not working? It is enable but it`s not working?
if you have the Intel T6600 CPU that is the standard CPU on that model then it just does not support Virtualization.
http://h10025.www1.hp.com/ewfrf/wc/docum...ct=4094272
http://www.cpu-world.com/CPUs/Core_2/Int...492ML.html
Edit, yours is a decent enough PC so if you need Virtualization then get an Intel T6750/T6670/T6970/T7100/T7250/T7300/T7500/T7700/T7800/T8100/T8300/T9300/T9500.
10-31-2011, 10:34 AM
Oh, and word of the wise, camiloml most likely gave you the VT -X option in advanced, DONT ENABLE IT!!!!!! I dont know if it have the same processor/cpu as the CQ60-615DX or not, but i did on mine, now i dont even get to post, no beeps, nothing 
10-31-2011, 10:38 AM
10-31-2011, 10:41 AM
also, camiloml, do you know how i could fix that? i tried to put the 360BF65.FD on my usb drive as 360B.FD and flash with: win+B, ctrl+B, all 4 arrow keys, and also doing that with clear cmos, and no luck
Me? I did that (read post above )
(10-31-2011, 10:38 AM)blahhtc Wrote: [ -> ]Pull the bios battery + the latops main battery for a min.
There is also this to restore old bios http://www.bios-mods.com/forum/Thread-HP...-USB--7214
Me? I did that (read post above
)