05-12-2009, 03:08 AM
08-15-2009, 03:21 PM
how does it work?
the original File is W7135NMS.170
can i rename your file to .170
and another Question is there a slic2.1 Table allready included ?
the original File is W7135NMS.170
can i rename your file to .170
and another Question is there a slic2.1 Table allready included ?
08-15-2009, 08:37 PM
Hi Mate
Just make a bootable DOS cd/usb drive/floppy and put the bios image (Rename my file to bios.bin) and awdflash.exe onto it. Then boot off the disk and type this at the DOS prompt :-
awdflash.exe bios.bin /py /sn /cc /r
This has HP 2.1 SLIC in it , as well as being unlocked - http://dl.getdropbox.com/u/747181/MS%207....1SLIC.BIN
Flash at your own risk!
Regards
Admin
Just make a bootable DOS cd/usb drive/floppy and put the bios image (Rename my file to bios.bin) and awdflash.exe onto it. Then boot off the disk and type this at the DOS prompt :-
awdflash.exe bios.bin /py /sn /cc /r
This has HP 2.1 SLIC in it , as well as being unlocked - http://dl.getdropbox.com/u/747181/MS%207....1SLIC.BIN
Flash at your own risk!
Regards
Admin
08-15-2009, 10:10 PM
Use the new AWARDFLASH Utility attached.
(08-15-2009, 08:37 PM)1234s282 Wrote: [ -> ]Hi Mate
Just make a bootable DOS cd/usb drive/floppy and put the bios image (Rename my file to bios.bin) and awdflash.exe onto it. Then boot off the disk and type this at the DOS prompt :-
awdflash.exe bios.bin /py /sn /cc /r
This has HP 2.1 SLIC in it , as well as being unlocked - http://dl.getdropbox.com/u/747181/MS%207....1SLIC.BIN
Flash at your own risk!
Regards
Admin