Bios Mods -The Best BIOS Update and Modification Source

It will be ready today i`m sorry for my late response .

Here is your unlocked bios :-

http://www.mediafire.com/?et2x1bfgn6ug7mi

try it and i`m waiting your reply

Have you tried the unlocked BIOS ! please leave us a feedback .

(03-15-2012, 11:15 AM)AHMED HOSSAM Wrote: [ -> ]Have you tried the unlocked BIOS ! please leave us a feedback .

Hi AHMED HOSSAM, I tried to flash your unlocked BIOS in my VAIO VGN-SZ94S, and it's working fine. So do you know if I buy a unlocked multiplier CPU, such as Core 2 Extreme X7900 or Core 2 Extreme X9000, could I overclock him with you unlocked BIOS?

Regards,

Overclocking is limited from the hardware not in BIOS , sothat even if i unlocked frequency ratio option it will not work properly .

---

Thanks for confirming,



Moved to unlocked /mod

(03-15-2012, 11:15 AM)AHMED HOSSAM Wrote: [ -> ]Have you tried the unlocked BIOS ! please leave us a feedback .

I have a Sony VGN-SZ670N with the original BIOS (which needed to be upgraded to support Memory, AHCI and VT). I upgraded from the Sony eSupport site to version R0122S5. I tested the new BIOS using SYMCMOS to confirm that it did indeed support AHCI and VT - confirmed. I then tested the BIOS for support of SLIC 2.1 and it did not have the entries which led me to this site.

I backed up my OEM Activation using Advanced Tokens Manager and prepared to do a clean install using the Windows 7 Ultimate x64 SP1 ISO file from Digital River. I then used the BIOS.MOD file in this thread to flash the R0122S5 that I just upgraded. The flash was successful and after reboot, I had additional menu structures that confirmed that an upgrade had happened (Questions on this below). I then rebooted and reran SLIC Toolkit v3.2 to confirm SLIC 2.1 was now moded. It showed a Cert of _ASUS__V2.1_Cert.xrm-ms and Product ID that matched the ATM backup.

Everything looked great, so I proceeded to do the clean install and restore the OEM licenses with ATM. Once I finished the initial install of the clean copy of W7USP1, I ran the SLIC Toolkit only to find that it supported SLIC 2.0 and not 2.1! It now showed a Cert of: No OEM Certificate found !(Run as Adminstrator). I reran the program as Administrator with the same results (side note: someone need to tell DavidXXW to run spell check! lol).

I then tried manually installing the Cert and Product ID using 1234s282's instructions of slmgr.vbs -ilc c:\********.xrm-ms and slmgr.vbs -ipk *****-*****-*****-*****-*****, but the SLIC Toolkit still indicated SLIC 2.0 and No OEM Certificate found !(Run as Adminstrator) even after reboot.

As a sanity check I re-imaged the original install and low and behold the SLIC Toolkit indicated SLIC 2.1 with the original Certs! Any idea what is happening here and why I'm not able to do a clean install?

(Question From Above): The BIOS.MOD file appears to work for this Phoenix version R0122S5, but I noticed some things that were not in the Menu structure:

<strike>1) There was no option to set the AHCI parameter, only VT was a menu item - Did I miss this under another Menu Option?</strike> Found under Intel ICH Menu
2) Under Advanced there was no option for "LCD Screen Expansion" Usually set to No, but it is set to Yes making it hard to get the entire Menu on the screen at once.

Thanks in advance for any feedback you can provide. I'm very new to all of this and tried to do a lot of reading before posting. But I have hit a brick wall on my understanding and skill set.

EDIT:

Is it possible that doing a clean install somehow introduces code in the OS that ignores the changes to the SLIC 2.1 BIOS tables and only recognizes the original SLIC 2.0 tables?

Anyone?

Even a late responce may help, maybe.

Firs of all, thanks for the mod. The update of the bios went ok, but as i see now I have some infos

1. VT & AHCI options are now present
2. No update on SLIC 2.1 for me, so Win7USP1 will not activate...If you can do something i'll appreciate.
4. Didn't see some memory settings, only by SPD.
5. TPM is now unlocked and much more options.
6. Don't know if something was done about whitelist for wwan or can be done...

Regards!

(05-29-2012, 04:03 PM)suiramon Wrote: [ -> ]1. VT & AHCI options are now present

OK I found the AHCI option under the Intel ICH menu

Thanks

i will try to make another MOD with SLIC2.1 ana wifi check remove
sorry for my late response, really busy studying for my exams.

Thanks! NP, Good luck!

I found a problem. I can't enable the TPM state of the chip. After i set it to 'enable' then from the next menu 'execute' the bios freezes...Only set it to 'enable' remains the same, 'no change'.

Please help!

Regards!