PCI id of original card?
Which error do you see when you exchange card with an unautorized card?
(02-11-2012, 11:44 AM)camiloml Wrote: [ -> ]PCI id of original card?
Which error do you see when you exchange card with an unautorized card?
The original card PCI id is 10ec:8172. It is a Realtek RTL8192SE WLAN Card.
If I switch the card with a different one the laptop won't boot (black screen).
Thanks!!
And are you sure the other card is in working condition? Have you tried another different card?
I ask this because this is the first bios for toshiba laptop i see that includes whitelisting.
(02-11-2012, 12:33 PM)camiloml Wrote: [ -> ]And are you sure the other card is in working condition? Have you tried another different card?
I ask this because this is the first bios for toshiba laptop i see that includes whitelisting.
Well, I tried two different cards and I had the same result.. And moreover I found in this forum another Toshiba owner with the same problem (but L500 series):
http://www.insanelymac.com/forum/index.php?showtopic=262252&st=20
That man have a problem regarding the power on/off switch the bios disabled that control, but pin 20 trick would have worked without messing with the bios, i think your problem is another one. If the machine does not boot....
http://www.bios-mods.com/BIOS/Whitelists...miloml.exe
There's one check against some PCI ID of wifi cards, i patched it to end always true.

Good luck. There's no endless loop or discourage message on the bios so i hope it boots fine with any card now.
(02-11-2012, 03:32 PM)camiloml Wrote: [ -> ]That man have a problem regarding the power on/off switch the bios disabled that control, but pin 20 trick would have worked without messing with the bios, i think your problem is another one. If the machine does not boot....
http://www.bios-mods.com/BIOS/Whitelists...miloml.exe
There's one check against some PCI ID of wifi cards, i patched it to end always true.
Good luck. There's no endless loop or discourage message on the bios so i hope it boots fine with any card now.
Thank you! I'll cross my finger and I try your modded BIOS.
Hope to write you back soon to report the results

t.
hi camilo
i tried to flash your rom with phlash16, winflash and winphlash, but i always receive the same message:
"Corrupted interface descriptors in the new BIOS file. Part Table Signature not found in the Interface".
Any clue?
t.