Bios Mods -The Best BIOS Update and Modification Source

I was not able to find a modded bios for this model on this version. Thanks

Quote:-Motherboard Manufacturer: Zotac
-Model : IONITX-F-E
-Bios Revision : 2K091012
-Bios Type : AMI
-Bios SLIC : Dell 2.1
-Bios Link : http://www.zotac.com/index.php?option=com_docman&task=doc_download&gid=309&Itemid=506&lang=en

Modified Bios:
SLIC: Dell 2.1
SLP: Dell
Cert: Dell
Modded with AMI SLIC Mod 1.61
Mod method: SSV2

Please help Me !!!

I have a serious problem with this motherboard ...
Using a hard disk 60 GB SSD OCZ Agility 3 ...

Creates many errors in communication by the Controller MCP7A Nvidia chipset with communication via a short cable SATA AHCI ...

Quote:May 18 21:13:44 mint kernel: [ 1069.881592] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen
May 18 21:13:44 mint kernel: [ 1069.881595] ata6: irq_stat 0x00400040, connection status changed
May 18 21:13:44 mint kernel: [ 1069.881598] ata6: SError: { PHYRdyChg 10B8B DevExch }

If I use this hard drive on a Asus P5E does not create any problems of communication ...

If I use the motherboard Zotac Ionitx fe creates the problem described above ...

OCZ Forum on Official suggest to overclock the chipset voltages ...

In Zotac IonItx FE (shoutbridge) can not be 'Increase of more':

Quote:Default || 1.05 V || 1.10 V

I ask you if this value could increase by more '... as in at least Asus P5E that supports 1.20 V ~ 1.30 V

Tests Performed With Linux Mint 12.04 (Maya Ubuntu)

Quote:-Motherboard Manufacturer: Zotac
-Model : IONITX F-E
-Bios Revision : 2K091012
-Bios Type : AMI
-Bios Link : http://www.zotac.com/index.php?option=co...06&lang=en

Modified Bios:
SLIC: Dell 2.1
SLP: Dell
Cert: Dell
Modded with AMI SLIC Mod 1.61
Mod method: SSV2

>>>>>>> Fixed Various Bugs <<<<<<<
- Error Comunication [SATA - AHCI] With Hard Disk OCZ AGILITY 3 SSD 60GB.
- Modded overclock Voltage Southbridge [Default | 1.15V | 1.20V].
- Performance optimization settings bios.
- Added the start of my modified bios signed.
>>> Default Voltage Southbridge is [Default | 1.05V | 1.10V]

I have personally tested the two modified bios before sending them on line.


>>>>>> Use it at your own risk <<<<<<<

DOWNLOAD My Bios Mods:

Quote:Zotac IonItx F-E SLIC 2.1 - Mods Voltage SouthBridge
http://www.mediafire.com/?uad1512724e1rru

Quote:Zotac IonItx F-E SLIC 2.1 - Mods Voltage SouthBridge - Optimization Settings My Backup
http://www.mediafire.com/?tfb5j209kjgpfl2

I Work,You Enjoy