https://www.bios-mods.com/forum/ Sun, 03 May 2026 00:17:17 +0000 MyBB https://www.bios-mods.com/forum/Thread-Request-Mod-Adaptec-ARCCONF-to-allow-x-flash-of-HPWS-SmartHBA-2100-4i4e Sat, 13 Sep 2025 11:14:07 -0400 Teetrinker]]> https://www.bios-mods.com/forum/Thread-Request-Mod-Adaptec-ARCCONF-to-allow-x-flash-of-HPWS-SmartHBA-2100-4i4e
I have several HP OEM Adaptec SmartHBA 2100-4i4e 8-Port SAS 12Gbps host bus adapter cards and need some help to get them to the latest firmware.

The SmartHBA 2100 is made by Adaptec/Microsemi/Microchip but years ago HP has sold the same card as a HP branded option for some of its workstations (the HP pn is 858096-001). The HP card is physically identical to the original Adaptec SmartHBA 2100-4i4e, however the HP card (often called the HPWS variant because of the two large stickers on both sides of the card) uses a modified version of the Adaptec firmware which lacks RAID5 support and which seems to have a different ID than the original Adaptec firmware as trying to flash the latter into a HPWS variant of that controller using the flash tool (ARCCONF) results in a firmware mismatch error.

The HPSW firmware is also stuck on version 1.98 from 2018 while the firmware for the original Adaptec version has been subsequently updated to now version 7.81, and between 1.98 and the later versions there have been a long list of changes which massively improved the performance of the controller, and its reliability. But with being stuck on the HP specific firmware, the HPWS version of the SmartHBA 2100 is unable to benefit from these improvements (and HP has already forgotten it ever offered this controller).

Being able to cross-flash the HPWS cards to stock Adaptec firmware would be great. For making this work, I suppose there are only two options:

1. Modify a new Adaptec FW file to match the ID of the HPSW FW so it can be flashed - but this would require having to do the modification again when a new FW comes out
   
2. Modify the Adaptec ARCCONF tool (which is used to flash the firmware of these controllers) so it can be used to force-flash the Adaptec FW into a HPWS card
   

The second option (modifying the flash tool to allow cross-flashing ) is the better option as a single flash with the Adaptec firmware should be enough to make the HPSW variant into a regular Adaptec variant.

I'm not a software developer so I can't do this on my own, hence the request here. But I'm far from the only person with this problem, there are lots of folks with these HPWS cards and which are stuck on the ancient firmware. The HPWS cards are also a lot cheaper on the 2nd hand market which would make them a great option if they could be cross-flashed.


The last HP firmware for the HPWS variant can be downloaded here:
https://support.hp.com/hk-en/drivers/swd...c-228537-2

The older v3.00 Adaptec firmware can be downloaded here:
https://fichiers.touslesdrivers.com/6571..._00_b0.zip

The current v7.81 firmware can be downloaded here:
https://fichiers.touslesdrivers.com/8267....81_b0.zip

ARCCONF for SmartHBA 2100 controllers can be found here:
https://fichiers.touslesdrivers.com/8160...B27449.zip]]>
I have several HP OEM Adaptec SmartHBA 2100-4i4e 8-Port SAS 12Gbps host bus adapter cards and need some help to get them to the latest firmware.

The SmartHBA 2100 is made by Adaptec/Microsemi/Microchip but years ago HP has sold the same card as a HP branded option for some of its workstations (the HP pn is 858096-001). The HP card is physically identical to the original Adaptec SmartHBA 2100-4i4e, however the HP card (often called the HPWS variant because of the two large stickers on both sides of the card) uses a modified version of the Adaptec firmware which lacks RAID5 support and which seems to have a different ID than the original Adaptec firmware as trying to flash the latter into a HPWS variant of that controller using the flash tool (ARCCONF) results in a firmware mismatch error.

The HPSW firmware is also stuck on version 1.98 from 2018 while the firmware for the original Adaptec version has been subsequently updated to now version 7.81, and between 1.98 and the later versions there have been a long list of changes which massively improved the performance of the controller, and its reliability. But with being stuck on the HP specific firmware, the HPWS version of the SmartHBA 2100 is unable to benefit from these improvements (and HP has already forgotten it ever offered this controller).

Being able to cross-flash the HPWS cards to stock Adaptec firmware would be great. For making this work, I suppose there are only two options:

1. Modify a new Adaptec FW file to match the ID of the HPSW FW so it can be flashed - but this would require having to do the modification again when a new FW comes out
   
2. Modify the Adaptec ARCCONF tool (which is used to flash the firmware of these controllers) so it can be used to force-flash the Adaptec FW into a HPWS card
   

The second option (modifying the flash tool to allow cross-flashing ) is the better option as a single flash with the Adaptec firmware should be enough to make the HPSW variant into a regular Adaptec variant.

I'm not a software developer so I can't do this on my own, hence the request here. But I'm far from the only person with this problem, there are lots of folks with these HPWS cards and which are stuck on the ancient firmware. The HPWS cards are also a lot cheaper on the 2nd hand market which would make them a great option if they could be cross-flashed.


The last HP firmware for the HPWS variant can be downloaded here:
https://support.hp.com/hk-en/drivers/swd...c-228537-2

The older v3.00 Adaptec firmware can be downloaded here:
https://fichiers.touslesdrivers.com/6571..._00_b0.zip

The current v7.81 firmware can be downloaded here:
https://fichiers.touslesdrivers.com/8267....81_b0.zip

ARCCONF for SmartHBA 2100 controllers can be found here:
https://fichiers.touslesdrivers.com/8160...B27449.zip]]> https://www.bios-mods.com/forum/Thread-request-mod-bios-for-RD450X Wed, 10 Jul 2024 17:45:32 -0400 Phoenix30081]]> https://www.bios-mods.com/forum/Thread-request-mod-bios-for-RD450X
  RD450xbios231.rar (Size: 4.18 MB / Downloads: 9) ]]>
  RD450xbios231.rar (Size: 4.18 MB / Downloads: 9) ]]> https://www.bios-mods.com/forum/Thread-I-want-to-install-H410M-H-V3-s-OpRom-file-to-X470-K4-BIOS Sat, 23 Dec 2023 06:28:37 -0500 amdradeonhd6950]]> https://www.bios-mods.com/forum/Thread-I-want-to-install-H410M-H-V3-s-OpRom-file-to-X470-K4-BIOS So I want to install H410 H V3 BIOS' OpRom code to my X470 K4 BIOS.
Does anyone can do this one? Please, I really want to use this SSD because I don't have much storage capacity without this SSD.
X470 K4's BIOS file is in the attachment, and H410 H V3 BIOS is here; https://download.gigabyte.com/FileList/B...d2b14e13cf 
Thanks in advance!

  X470 Gaming K4(10.01)ROM.zip (Size: 10.8 MB / Downloads: 0) ]]> So I want to install H410 H V3 BIOS' OpRom code to my X470 K4 BIOS.
Does anyone can do this one? Please, I really want to use this SSD because I don't have much storage capacity without this SSD.
X470 K4's BIOS file is in the attachment, and H410 H V3 BIOS is here; https://download.gigabyte.com/FileList/B...d2b14e13cf 
Thanks in advance!

  X470 Gaming K4(10.01)ROM.zip (Size: 10.8 MB / Downloads: 0) ]]> https://www.bios-mods.com/forum/Thread-Machinist-X99-MR9A-PRO-noRAID-support Wed, 03 May 2023 09:55:40 -0400 LazIv]]> https://www.bios-mods.com/forum/Thread-Machinist-X99-MR9A-PRO-noRAID-support I have a problem "no RAID support in BIOS"
Machinist X99 MR9A PRO motherboard
after switching SATA to RAID mode, it does not start and loses disks
ctrl+I login is not possible

I'm sure that there are not enough modules in the BIOS itself
please guide me on the way to study the problem

bios in attach https://cloud.mail.ru/public/DZcA/1nFrBxurb

  MNX99 MR9A PRO.zip (Size: 4.36 MB / Downloads: 10) ]]> I have a problem "no RAID support in BIOS"
Machinist X99 MR9A PRO motherboard
after switching SATA to RAID mode, it does not start and loses disks
ctrl+I login is not possible

I'm sure that there are not enough modules in the BIOS itself
please guide me on the way to study the problem

bios in attach https://cloud.mail.ru/public/DZcA/1nFrBxurb

  MNX99 MR9A PRO.zip (Size: 4.36 MB / Downloads: 10) ]]> https://www.bios-mods.com/forum/Thread-HELP-Clevo-BIOS-unlock-noob Sat, 13 Feb 2021 08:29:46 -0500 toony]]> https://www.bios-mods.com/forum/Thread-HELP-Clevo-BIOS-unlock-noob Hello.

I am asking you for help in unlocking the bios in my Clevo. I purchased an additional m2 disk and wanted to do RAID 0, but to my surprise the BIOS has a hidden option to do this. An additional surprise is the fact that one connector is NVM gen 3 and the other is gen 2, is it possible to change both m2 connectors. former 3rd gen? as with lenovo this was the way to go.

I don't want to damage my laptop, and I'm a total noob when it comes to bios modifications. Thank you in advance and best regards! 

Link to my bios

http://s000.tinyupload.com/?file_id=0060...2169278506]]> Hello.

I am asking you for help in unlocking the bios in my Clevo. I purchased an additional m2 disk and wanted to do RAID 0, but to my surprise the BIOS has a hidden option to do this. An additional surprise is the fact that one connector is NVM gen 3 and the other is gen 2, is it possible to change both m2 connectors. former 3rd gen? as with lenovo this was the way to go.

I don't want to damage my laptop, and I'm a total noob when it comes to bios modifications. Thank you in advance and best regards! 

Link to my bios

http://s000.tinyupload.com/?file_id=0060...2169278506]]> https://www.bios-mods.com/forum/Thread-HP-15-ah151sa-MB-ACW51-LA-C502P-DVD-Drive-Enable-Boot-from-DVD-Enable-Mods-Required Sun, 01 Nov 2020 15:20:15 -0500 Kazik]]> https://www.bios-mods.com/forum/Thread-HP-15-ah151sa-MB-ACW51-LA-C502P-DVD-Drive-Enable-Boot-from-DVD-Enable-Mods-Required
Can anybody enable DVD drive and DVD boot in bios, please?

Thank you.

  HP 15-ah151sa MB ACW51 LA-C502P rev1.0 W25Q64FW [SOIC8] dump1.rar (Size: 3.5 MB / Downloads: 0) ]]>
Can anybody enable DVD drive and DVD boot in bios, please?

Thank you.

  HP 15-ah151sa MB ACW51 LA-C502P rev1.0 W25Q64FW [SOIC8] dump1.rar (Size: 3.5 MB / Downloads: 0) ]]> https://www.bios-mods.com/forum/Thread-Request-updated-BIOS-for-EP45-UD3R-v1-1 Sat, 21 Mar 2020 12:27:35 -0400 Simba7]]> https://www.bios-mods.com/forum/Thread-Request-updated-BIOS-for-EP45-UD3R-v1-1
Can I request two separate BIOS's, one that supports 771 and one that supports standard 775 processors?

I'm currently running the F13e BIOS.]]>
Can I request two separate BIOS's, one that supports 771 and one that supports standard 775 processors?

I'm currently running the F13e BIOS.]]> https://www.bios-mods.com/forum/Thread-Dell-Precision-T7600-Boot-from-RAID1-NVMe Tue, 24 Sep 2019 17:11:16 -0400 Guswah]]> https://www.bios-mods.com/forum/Thread-Dell-Precision-T7600-Boot-from-RAID1-NVMe
I set out to find someone who does this and might take on the task. I would be dishonest if I didn't offer to pay or "donate" if this can be accomplished.

It appears there is a legion of Dell Precisions around the world, and all would share this problem. So maybe this mod has already been made and someone might point me in the right direction to get it.]]>
I set out to find someone who does this and might take on the task. I would be dishonest if I didn't offer to pay or "donate" if this can be accomplished.

It appears there is a legion of Dell Precisions around the world, and all would share this problem. So maybe this mod has already been made and someone might point me in the right direction to get it.]]> https://www.bios-mods.com/forum/Thread-GA-Z97X-gaming-7-OROM-SSD-P1-Crucial-and-IME-REQUEST Wed, 14 Aug 2019 11:20:22 -0400 PitKoz]]> https://www.bios-mods.com/forum/Thread-GA-Z97X-gaming-7-OROM-SSD-P1-Crucial-and-IME-REQUEST
Hi, guys, there is new-old hardware in my hands.

It has several problems:

1/. Windows 7 and SSD: P1 Crucial: CT1000P188D8 M.2/PCX connector onboard'
W7 Can't see it,

2/. There is a need for update OROM " TO BEST POSSIBLE "
working in line with 15 edition level of drivers and software for RST,
as finally have to migrate my actual systems to this SSD.
(there is something with Certificate for 15.9 RST in Win-Raid Fernando modded driver. W7 says 15.9 from Fernando is not valid for the system due to lack of Ceryficaste but Cert from Fernando attached to file is registering, there must be a small typo somewhere in files.

There is mentioned that solution for this is an update from MS but I did not find
the numbers of updates, as they are around in the form of an addition to WIM.

3/. As I mentioned in Win-Raid forum I can not install new system per
certification f software and drivers for my peripherals so have to use the systems installed before Certs expired... and have some copies of them and using them for setup W7 system on the PC.

and get rid of firmware related to IME.
(https://github.com/corna/me_cleaner/wiki...isable-bit)

So far I did a mod for visibility and possibility to boot from it in BIOS from P1 Crucial: CT1000P188D8 M.2
It is uploaded there, can someone check it and say if I did it the proper way.
Basic revision is F6 higher revisions F7 and F8 are not really well described, so most people say these revs were made for compatibility with Intel 5 platform, implementing even wilder IME spyware to life and they are changing plenty as there is note "this upgrade is irreversible" to F6 and lower. Intel 5 line has IME completely inbuild in CPU so it will be much more hard to get rid of it, but I know the work is in progress.


The board is GA-Z97X gaming 7

The CPU is Intel Core i7-4790K

Memory Rock stable:
Type    DDR3
Size    4096 MBytes
Manufacturer    Hyundai Electronics
Max Bandwidth    PC3-12800 (800 MHz)
Part Number    HMT351U6CFR8C-PB
Serial Number    1213974520
Week/year    06 / 12

Microsoft Windows 7 Ultimate (x64) Build 7601 (Service Pack 1)

What more info can I add? L-N-B?

All best to all of you guys,
Peter

Bios moded link:
https://mega.nz/#!W01TgQaK!EkGFci3hMxWS5...LNEGsGQs0g]]>
Hi, guys, there is new-old hardware in my hands.

It has several problems:

1/. Windows 7 and SSD: P1 Crucial: CT1000P188D8 M.2/PCX connector onboard'
W7 Can't see it,

2/. There is a need for update OROM " TO BEST POSSIBLE "
working in line with 15 edition level of drivers and software for RST,
as finally have to migrate my actual systems to this SSD.
(there is something with Certificate for 15.9 RST in Win-Raid Fernando modded driver. W7 says 15.9 from Fernando is not valid for the system due to lack of Ceryficaste but Cert from Fernando attached to file is registering, there must be a small typo somewhere in files.

There is mentioned that solution for this is an update from MS but I did not find
the numbers of updates, as they are around in the form of an addition to WIM.

3/. As I mentioned in Win-Raid forum I can not install new system per
certification f software and drivers for my peripherals so have to use the systems installed before Certs expired... and have some copies of them and using them for setup W7 system on the PC.

and get rid of firmware related to IME.
(https://github.com/corna/me_cleaner/wiki...isable-bit)

So far I did a mod for visibility and possibility to boot from it in BIOS from P1 Crucial: CT1000P188D8 M.2
It is uploaded there, can someone check it and say if I did it the proper way.
Basic revision is F6 higher revisions F7 and F8 are not really well described, so most people say these revs were made for compatibility with Intel 5 platform, implementing even wilder IME spyware to life and they are changing plenty as there is note "this upgrade is irreversible" to F6 and lower. Intel 5 line has IME completely inbuild in CPU so it will be much more hard to get rid of it, but I know the work is in progress.


The board is GA-Z97X gaming 7

The CPU is Intel Core i7-4790K

Memory Rock stable:
Type    DDR3
Size    4096 MBytes
Manufacturer    Hyundai Electronics
Max Bandwidth    PC3-12800 (800 MHz)
Part Number    HMT351U6CFR8C-PB
Serial Number    1213974520
Week/year    06 / 12

Microsoft Windows 7 Ultimate (x64) Build 7601 (Service Pack 1)

What more info can I add? L-N-B?

All best to all of you guys,
Peter

Bios moded link:
https://mega.nz/#!W01TgQaK!EkGFci3hMxWS5...LNEGsGQs0g]]> https://www.bios-mods.com/forum/Thread-Dell-Optiplex-3020-enable-RAID-1 Sun, 02 Jun 2019 16:14:23 -0400 CavemanTech]]> https://www.bios-mods.com/forum/Thread-Dell-Optiplex-3020-enable-RAID-1
I am wondering if this is something that can be easily modded and "turned on" in the existing BIOS code, without any major code revisions.

I am looking to do RAID 1 only.

Link to latest BIOS update from Dell, version A19:

https://downloads.dell.com/FOLDER0530030...020A19.exe

The OptiPlex 3020, in all form factors, MiniTower, Small Form Factor, and Micro, use the Intel H81 Chipset.

Any help would be appreciated.]]>
I am wondering if this is something that can be easily modded and "turned on" in the existing BIOS code, without any major code revisions.

I am looking to do RAID 1 only.

Link to latest BIOS update from Dell, version A19:

https://downloads.dell.com/FOLDER0530030...020A19.exe

The OptiPlex 3020, in all form factors, MiniTower, Small Form Factor, and Micro, use the Intel H81 Chipset.

Any help would be appreciated.]]> https://www.bios-mods.com/forum/Thread-GA-EP45T-UD3P-v1-0-4TB-support Fri, 01 Jun 2018 23:20:41 -0400 reehmicks]]> https://www.bios-mods.com/forum/Thread-GA-EP45T-UD3P-v1-0-4TB-support
I saw that there was an updated bios posted a couple years ago with updated modules to support larger drives.

Would anyone have that firmware handy? The old attachments are gone.

(F8C version)

Thanks.]]>
I saw that there was an updated bios posted a couple years ago with updated modules to support larger drives.

Would anyone have that firmware handy? The old attachments are gone.

(F8C version)

Thanks.]]> https://www.bios-mods.com/forum/Thread-REQUEST-Lenovo-G500-RAID Tue, 18 Jul 2017 06:59:24 -0400 sskul212]]> https://www.bios-mods.com/forum/Thread-REQUEST-Lenovo-G500-RAID 1) UPDATE NEW LENOVO LOGO in splash screen.
2) UNLOCK IRST RAID.
ROM:-
 http://www.mediafire.com/file/aoqcd7ulc8....03%29.rom]]> 1) UPDATE NEW LENOVO LOGO in splash screen.
2) UNLOCK IRST RAID.
ROM:-
 http://www.mediafire.com/file/aoqcd7ulc8....03%29.rom]]> https://www.bios-mods.com/forum/Thread-REQUEST-GA-EP43-DS3l-Enable-RAID Sat, 27 May 2017 17:26:36 -0400 eddownz]]> https://www.bios-mods.com/forum/Thread-REQUEST-GA-EP43-DS3l-Enable-RAID
Is it possible to mod it so that it does?

Thanks]]>
Is it possible to mod it so that it does?

Thanks]]> https://www.bios-mods.com/forum/Thread-asus-rampage-formula-iv-pcie-boot-access Wed, 26 Apr 2017 10:17:42 -0400 QuantumRage10]]> https://www.bios-mods.com/forum/Thread-asus-rampage-formula-iv-pcie-boot-access
anyway im looking into buying a nvme drive with and a m.2 to pcie adapter (maybe the kingston hyper x predator for example) my motherboard is a asus rampage formula iv. i haven't found allot of info online in terms of booting an operating system from a pcie express lane but it looks like im going to need a custom bios mod to allow this to happen. i found a Thread saying that you could mod the bios with nvme modules from a x99 board but i literally have no idea how to do that or if the guy is trolling. im also not 100% certain on what i need to do to be able to boot from a nvme drive if its as simple as installing an operating system i will be fine. im also planing on using windows 10 of cause. if someone could share a little advice and equip me with the right tools and info i would be much appreciative. thanks in advance 

one other thing that i may consider doing is raiding two predator hyper x cards together as announced in this post would it be possible to do that with a bios hack as well? this is something i may consider doing in the future but knowing now will be a big help so i don't over plan or anything. i understand this type of technology is fairly new so if you ppl cant help me out. then just tell me. i would rather not know then have an uninformed incorrect answer (i have seen this happen allot. like going to your local retail store and asking for advice. people telling you that wall powered 3g/4g modems don't exist even tho you where looking at them online an hour ago for Example)

edit:1
i just found a video relating to this topic. still looks like something more complex will be needed to be able to boot from the drive tho.

edit 2
this video basically shows basically what im looking to do and what type of settings im after. i have come to the conclusion that the only thing stopping this from working is the bios. i hope this helps if someone decides to make a bios hack for this]]>
anyway im looking into buying a nvme drive with and a m.2 to pcie adapter (maybe the kingston hyper x predator for example) my motherboard is a asus rampage formula iv. i haven't found allot of info online in terms of booting an operating system from a pcie express lane but it looks like im going to need a custom bios mod to allow this to happen. i found a Thread saying that you could mod the bios with nvme modules from a x99 board but i literally have no idea how to do that or if the guy is trolling. im also not 100% certain on what i need to do to be able to boot from a nvme drive if its as simple as installing an operating system i will be fine. im also planing on using windows 10 of cause. if someone could share a little advice and equip me with the right tools and info i would be much appreciative. thanks in advance 

one other thing that i may consider doing is raiding two predator hyper x cards together as announced in this post would it be possible to do that with a bios hack as well? this is something i may consider doing in the future but knowing now will be a big help so i don't over plan or anything. i understand this type of technology is fairly new so if you ppl cant help me out. then just tell me. i would rather not know then have an uninformed incorrect answer (i have seen this happen allot. like going to your local retail store and asking for advice. people telling you that wall powered 3g/4g modems don't exist even tho you where looking at them online an hour ago for Example)

edit:1
i just found a video relating to this topic. still looks like something more complex will be needed to be able to boot from the drive tho.

edit 2
this video basically shows basically what im looking to do and what type of settings im after. i have come to the conclusion that the only thing stopping this from working is the bios. i hope this helps if someone decides to make a bios hack for this]]> https://www.bios-mods.com/forum/Thread-Add-Unlock-extra-second-SATA-msata-port-in-AMI-BIOS Sun, 05 Feb 2017 15:33:18 -0500 Modnnkh]]> https://www.bios-mods.com/forum/Thread-Add-Unlock-extra-second-SATA-msata-port-in-AMI-BIOS I have a Lenovo ThinkCentre M73 Tiny PC with a normal 2.5 SATA hdd, I looked at the motherboard which had solder markings and room for an optional msata 1 slot, so I headed online and got a port and soldered it onboard. Then I inserted my msata ssd hoping for the magical upgrade to do its thing, but unfortunately it didn't appear in the BIOS. I noted that in the bios screen it only shows SATA 1 and no other port. So I was hoping if ant of the experts out there can help me out and unlock/add the extra SATA port?

Note: I found the same motherboard (m4500q model) with working msata port on one of the chinese sites online. (http://club.lenovo.cn/detail/897726)
Which confirms that it's possible

PC model: ThinkCentre M73 Tiny
Motherboard: Lenovo IS8XT v1.1
BIOS: AMI FHKT70AUS
http://support.lenovo.com/ae/en/downloads/ds038325

  IMG-20170206-WA0015.jpg (Size: 100.17 KB / Downloads: 57)

  IMG-20170206-WA0014.jpg (Size: 106.13 KB / Downloads: 60)

  IMG-20170206-WA0024.jpg (Size: 59.68 KB / Downloads: 28)

  FHJY70USA.zip (Size: 5.1 MB / Downloads: 7) ]]> I have a Lenovo ThinkCentre M73 Tiny PC with a normal 2.5 SATA hdd, I looked at the motherboard which had solder markings and room for an optional msata 1 slot, so I headed online and got a port and soldered it onboard. Then I inserted my msata ssd hoping for the magical upgrade to do its thing, but unfortunately it didn't appear in the BIOS. I noted that in the bios screen it only shows SATA 1 and no other port. So I was hoping if ant of the experts out there can help me out and unlock/add the extra SATA port?

Note: I found the same motherboard (m4500q model) with working msata port on one of the chinese sites online. (http://club.lenovo.cn/detail/897726)
Which confirms that it's possible

PC model: ThinkCentre M73 Tiny
Motherboard: Lenovo IS8XT v1.1
BIOS: AMI FHKT70AUS
http://support.lenovo.com/ae/en/downloads/ds038325

  IMG-20170206-WA0015.jpg (Size: 100.17 KB / Downloads: 57)

  IMG-20170206-WA0014.jpg (Size: 106.13 KB / Downloads: 60)

  IMG-20170206-WA0024.jpg (Size: 59.68 KB / Downloads: 28)

  FHJY70USA.zip (Size: 5.1 MB / Downloads: 7) ]]>