<![CDATA[Bios Mods - The Best BIOS Update and Modification Source - Hewlett Packard (HP)]]> https://www.bios-mods.com/forum/ Mon, 06 Apr 2026 12:01:09 +0000 MyBB <![CDATA[UNLOCK]]> https://www.bios-mods.com/forum/Thread-UNLOCK Wed, 28 Oct 2015 04:37:12 -0400 FLISH]]> https://www.bios-mods.com/forum/Thread-UNLOCK MSI MS-7778 (Jasmine) and i cant seem to find a bios unlock anywhere im needing it so i can put more memory towards my intergrated graphics and i cant find the bios i need if you can help at all that would be awesome thank you for your time]]> MSI MS-7778 (Jasmine) and i cant seem to find a bios unlock anywhere im needing it so i can put more memory towards my intergrated graphics and i cant find the bios i need if you can help at all that would be awesome thank you for your time]]> <![CDATA[HP 097Ch Motherboard modded Bois]]> https://www.bios-mods.com/forum/Thread-HP-097Ch-Motherboard-modded-Bois Sat, 15 Nov 2014 14:05:00 -0500 anonymous-one]]> https://www.bios-mods.com/forum/Thread-HP-097Ch-Motherboard-modded-Bois <![CDATA[HP dv6-6b42eo Bios]]> https://www.bios-mods.com/forum/Thread-HP-dv6-6b42eo-Bios Mon, 11 Mar 2013 17:07:28 -0400 kever22]]> https://www.bios-mods.com/forum/Thread-HP-dv6-6b42eo-Bios
I am in need of your help with getting into my bios advanced setting. It's an HP Pavilion dv6-6b42eo and the bios is locked. Thanks in advanced! : )

Download link to Bios http://h10025.www1.hp.com/ewfrf/wc/softw...9&sw_lang=]]>
I am in need of your help with getting into my bios advanced setting. It's an HP Pavilion dv6-6b42eo and the bios is locked. Thanks in advanced! : )

Download link to Bios http://h10025.www1.hp.com/ewfrf/wc/softw...9&sw_lang=]]> <![CDATA[HP Proliant Microserver AMI BIOS MOD ** FLASH TUTORIAL **]]> https://www.bios-mods.com/forum/Thread-HP-Proliant-Microserver-AMI-BIOS-MOD-FLASH-TUTORIAL Fri, 08 Feb 2013 10:11:03 -0500 karadayi]]> https://www.bios-mods.com/forum/Thread-HP-Proliant-Microserver-AMI-BIOS-MOD-FLASH-TUTORIAL
After some had Problems during flashing the BIOS, I decided to make a Quick (short) Tutorial. Please correct me if I explain wrong.

This Tutorial is a short Version of HP ProLiant N40L MicroServer Build and BIOS Modification Revisited

  1. Check if you have the Bios ID 041 during booting with the F10 key - Figure 1
  2. Download the File Systems ROMPaq Firmware Upgrade for HP ProLiant MicroServer (Alternate: Diehard’s System Rompaq Firmware)
  3. The downloaded File from HP is called SP54344.exe and from DieHard SP52016.exe. Both should do the same as told by Joe Miner
  4. Install the File SP54344.exe. You will find it at "C:\SWSetup\SP54344"
  5. Go to this Folder and open the Folder "USB Key"(C:\SWSetup\SP54344\USB Key).
  6. Start the File HPQUSB.exe and follow the Wizard (dont forget to plug in your USB Stick)
  7. Download the File o41072911mod.rar directly and extract. Than rename it to o41072911.rom The first letter is an "Oh" NOT ZERO!
  8. Browse your USB and replace the file o41072911.rom. The Filesize must be 2.048 KB [2,00 MB (2.097.152 Bytes)]
  9. Switch OFF your Microserver NL40
  10. Put out the HDD
  11. Plug-In the USB
  12. Switch ON your Microserver NL40
  13. DO NOT TOUCH NOW ANYTHING! THE WHOLE PROCEDURE IS AUTOMATICALLY. WAIT UNTIL YOU SEE THE C:\> PROMPT ! IT TAKES AROUND 50-60 SECONDS TILL IS FINISHED
  14. Now you can Power Down and Power On again
  15. Press F10 during BIOS is loading to access again the BIOS Screen
  16. You will see the Tab PCIPnP and Chipset. This means your Bios is modified.
  17. Thats it. Now you can configure your Bios
ATTENTION: I guess people who have Black Screen Problems after flashing the Boot is that those understand to rename the RAR File. This is wrong! You HAVE TO unrar or unzip the o41072911mod.rar File! Check the unzipped File Size to equal 2.048 KB [2,00 MB (2.097.152 Bytes)] The Tutorial below did not helped me and I it send back. Maybe it can help some others.

Black Screen Tutorial - HP Support
  1. Power off your MicroServer NL40 and wait for 5 Minutes
  2. Go to "C:\SWSetup\SP54344\USB Key"
  3. Plug-In your USB
  4. Start the File HPQUSB.exe and follow the Wizard.
  5. Unplug your USB from Computer and Plug-In to your MicroServer NL40
  6. Power On and wait for 5-10 Minutes. For a period of time, there will be no video displayed on the screen. This is expected behavior
  7. Power the server off and unplug the USB drive
  8. Power the server on again. The system will boot and the System BIOS will be re-flashed successfully.
Note: I am not responsible for this Tutorial or any Errors. This is just a shorted Version of Joe Miners (http://homeservershow.com/hp-proliant-n4...sited.html) Tutorial.

Regards
karadayi]]>
After some had Problems during flashing the BIOS, I decided to make a Quick (short) Tutorial. Please correct me if I explain wrong.

This Tutorial is a short Version of HP ProLiant N40L MicroServer Build and BIOS Modification Revisited

  1. Check if you have the Bios ID 041 during booting with the F10 key - Figure 1
  2. Download the File Systems ROMPaq Firmware Upgrade for HP ProLiant MicroServer (Alternate: Diehard’s System Rompaq Firmware)
  3. The downloaded File from HP is called SP54344.exe and from DieHard SP52016.exe. Both should do the same as told by Joe Miner
  4. Install the File SP54344.exe. You will find it at "C:\SWSetup\SP54344"
  5. Go to this Folder and open the Folder "USB Key"(C:\SWSetup\SP54344\USB Key).
  6. Start the File HPQUSB.exe and follow the Wizard (dont forget to plug in your USB Stick)
  7. Download the File o41072911mod.rar directly and extract. Than rename it to o41072911.rom The first letter is an "Oh" NOT ZERO!
  8. Browse your USB and replace the file o41072911.rom. The Filesize must be 2.048 KB [2,00 MB (2.097.152 Bytes)]
  9. Switch OFF your Microserver NL40
  10. Put out the HDD
  11. Plug-In the USB
  12. Switch ON your Microserver NL40
  13. DO NOT TOUCH NOW ANYTHING! THE WHOLE PROCEDURE IS AUTOMATICALLY. WAIT UNTIL YOU SEE THE C:\> PROMPT ! IT TAKES AROUND 50-60 SECONDS TILL IS FINISHED
  14. Now you can Power Down and Power On again
  15. Press F10 during BIOS is loading to access again the BIOS Screen
  16. You will see the Tab PCIPnP and Chipset. This means your Bios is modified.
  17. Thats it. Now you can configure your Bios
ATTENTION: I guess people who have Black Screen Problems after flashing the Boot is that those understand to rename the RAR File. This is wrong! You HAVE TO unrar or unzip the o41072911mod.rar File! Check the unzipped File Size to equal 2.048 KB [2,00 MB (2.097.152 Bytes)] The Tutorial below did not helped me and I it send back. Maybe it can help some others.

Black Screen Tutorial - HP Support
  1. Power off your MicroServer NL40 and wait for 5 Minutes
  2. Go to "C:\SWSetup\SP54344\USB Key"
  3. Plug-In your USB
  4. Start the File HPQUSB.exe and follow the Wizard.
  5. Unplug your USB from Computer and Plug-In to your MicroServer NL40
  6. Power On and wait for 5-10 Minutes. For a period of time, there will be no video displayed on the screen. This is expected behavior
  7. Power the server off and unplug the USB drive
  8. Power the server on again. The system will boot and the System BIOS will be re-flashed successfully.
Note: I am not responsible for this Tutorial or any Errors. This is just a shorted Version of Joe Miners (http://homeservershow.com/hp-proliant-n4...sited.html) Tutorial.

Regards
karadayi]]> <![CDATA[hp dv7 3190ev bios]]> https://www.bios-mods.com/forum/Thread-hp-dv7-3190ev-bios Wed, 25 Jul 2012 12:20:12 -0400 giorgosperi]]> https://www.bios-mods.com/forum/Thread-hp-dv7-3190ev-bios <![CDATA[Unlocks AHCI on a Pavilion zv6130us]]> https://www.bios-mods.com/forum/Thread-Unlocks-AHCI-on-a-Pavilion-zv6130us Sat, 23 Jun 2012 08:49:26 -0400 The Veterant]]> https://www.bios-mods.com/forum/Thread-Unlocks-AHCI-on-a-Pavilion-zv6130us
Note: I will make a humble donation cause I believe in helping each other out.

http://h10025.www1.hp.com/ewfrf/wc/softw...00264#N485

ANY MODERATOR OUT THERE AND SEE THIS POST CAN GO HEAD AND DELETE THIS POSTED, WRONG POSTING AREA, SORRY!]]>
Note: I will make a humble donation cause I believe in helping each other out.

http://h10025.www1.hp.com/ewfrf/wc/softw...00264#N485

ANY MODERATOR OUT THERE AND SEE THIS POST CAN GO HEAD AND DELETE THIS POSTED, WRONG POSTING AREA, SORRY!]]> <![CDATA[HP Proliant Microserver AMI BIOS MOD]]> https://www.bios-mods.com/forum/Thread-HP-Proliant-Microserver-AMI-BIOS-MOD Sat, 31 Dec 2011 06:36:01 -0500 matejrexo]]> https://www.bios-mods.com/forum/Thread-HP-Proliant-Microserver-AMI-BIOS-MOD Recently I opened the ROM file for my AMI BIOS upgrade (I have got an HP ProLiant Microserver with AMD RS785E chipset) via AMIBCP and found out that there is an option "Able to change freq" which is set to "hidden". There are also more hidden features. I would like to know if it is as simple as enabling that option and flashing BIOS with that modded ROM file, or are there any things which should I know first? Because I have got very limited options in BIOS now. The best would if any of you could pre-patch it for me (I attached the ROM file below) thanks


.zip   ROM.zip (Size: 723.14 KB / Downloads: 1031) ]]> Recently I opened the ROM file for my AMI BIOS upgrade (I have got an HP ProLiant Microserver with AMD RS785E chipset) via AMIBCP and found out that there is an option "Able to change freq" which is set to "hidden". There are also more hidden features. I would like to know if it is as simple as enabling that option and flashing BIOS with that modded ROM file, or are there any things which should I know first? Because I have got very limited options in BIOS now. The best would if any of you could pre-patch it for me (I attached the ROM file below) thanks


.zip   ROM.zip (Size: 723.14 KB / Downloads: 1031) ]]>