<![CDATA[Bios Mods - The Best BIOS Update and Modification Source - Elitegroup (ECS)]]> https://www.bios-mods.com/forum/ Mon, 11 May 2026 14:46:07 +0000 MyBB <![CDATA[THIS IS NOT A REQUEST FORUM]]> https://www.bios-mods.com/forum/Thread-THIS-IS-NOT-A-REQUEST-FORUM--16834 Sat, 23 Aug 2014 17:30:02 -0400 Sml6397]]> https://www.bios-mods.com/forum/Thread-THIS-IS-NOT-A-REQUEST-FORUM--16834


THIS IS NOT A REQUEST FORUM. DO NOT POST REQUESTS HERE.


If you want your thread to get attention from BIOS modders, please post in the Award BIOS Unlocking Requests forum.
Threads posted here in the Confirmed Unlocked forum are assumed to be dealt with and will receive no more attention.





Regards,
BIOS-Mods Forum Team]]>


THIS IS NOT A REQUEST FORUM. DO NOT POST REQUESTS HERE.


If you want your thread to get attention from BIOS modders, please post in the Award BIOS Unlocking Requests forum.
Threads posted here in the Confirmed Unlocked forum are assumed to be dealt with and will receive no more attention.





Regards,
BIOS-Mods Forum Team]]> <![CDATA[ECS L4S5MG3 rev1.0]]> https://www.bios-mods.com/forum/Thread-ECS-L4S5MG3-rev1-0 Mon, 25 Oct 2010 09:16:35 -0400 tooms]]> https://www.bios-mods.com/forum/Thread-ECS-L4S5MG3-rev1-0 bios:1.0d
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?CategoryID=1&DetailID=28&DetailName=Feature&MenuID=24&LanID=0


any help would be greatly appreciated thank you.]]> bios:1.0d
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?CategoryID=1&DetailID=28&DetailName=Feature&MenuID=24&LanID=0


any help would be greatly appreciated thank you.]]> <![CDATA[ECS MCP61 Bios here:]]> https://www.bios-mods.com/forum/Thread-ECS-MCP61-Bios-here Tue, 17 Aug 2010 05:24:24 -0400 dawoodakram2]]> https://www.bios-mods.com/forum/Thread-ECS-MCP61-Bios-here
same options as your abit bios but with ddr2 400 and also:

VTT VOLTAGE SELECT 1.20 - 1.30V

CHIPSET V-DUAL SET
1.20 - 1.50V

VCORE VOLTAGE SELECT
FROM MINUSES TO 0.325

AND CHIPSET VCORE SELECT
1.225 - 1.375

What are these and can i overclock good with this bios???? i will attach original bios here also, has id,vid, htt, and all that also, and voltageas norm. and mem timings and stuff like abit.



.zip   662W1P45.zip (Size: 357.18 KB / Downloads: 282) ]]>
same options as your abit bios but with ddr2 400 and also:

VTT VOLTAGE SELECT 1.20 - 1.30V

CHIPSET V-DUAL SET
1.20 - 1.50V

VCORE VOLTAGE SELECT
FROM MINUSES TO 0.325

AND CHIPSET VCORE SELECT
1.225 - 1.375

What are these and can i overclock good with this bios???? i will attach original bios here also, has id,vid, htt, and all that also, and voltageas norm. and mem timings and stuff like abit.



.zip   662W1P45.zip (Size: 357.18 KB / Downloads: 282) ]]> <![CDATA[MCP61PM-AM Rev. 1.0]]> https://www.bios-mods.com/forum/Thread-MCP61PM-AM-Rev-1-0 Fri, 23 Jul 2010 01:01:35 -0400 roboron]]> https://www.bios-mods.com/forum/Thread-MCP61PM-AM-Rev-1-0
I used the "HP Nettle2/3 COMPAQ IRIS8 and Acer Aspire E380 Unlocked RETAIL Bios" as on this page

Being a BIOS-mod newbie, I almost panicked when it would not boot, then remembered I had to reset the CMOS... duh!

OK, it works. Not so terribly exciting though... but worth it!!

It added a few features: "AMD Cool and Quiet (works!... but may have seen some instability when using it after OC-ing), Adjustment of CPU FSB (had this before, but now it actually saves/uses it), and even setting the voltage (RAM voltage from 1.8V to 1.9V - used it!) and memory timings (same as original)."

It also allows disabling of the on-board GPU when another one is plugged-in... nice little feature!

Still lacks any kind of REAL control over RAM timing though... just very basics as OEM BIOS 3-speeds to choose from, or automatic.

(Note: Some "OEM" settings/options were accessed with a CTRL-F1... this does nothing now as all options are always exposed)

Still lacks CPU multiplier... BUMMER!!

Bought that 5000+ Black Edition, and not able to fully utilize it. Was able to squeeze out about 3GHz though, with Clock of 230MHz, FSB mult. of 4 ("K8<->NB"), my 800MHz memory would only run reliably in the 667MHz setting. Shame, having CL2 memory running at CL5.... or worse.

Might still try to move back to FSB mult. of 5 - giving me a FSB of 1150MHz... any thoughts? (remember, I'm new at this modded BIOS thing... so any help is good help!)

Original 1.12 and Gateway's latest 1.14 attached... in case anyone wants to take a look]]>
I used the "HP Nettle2/3 COMPAQ IRIS8 and Acer Aspire E380 Unlocked RETAIL Bios" as on this page

Being a BIOS-mod newbie, I almost panicked when it would not boot, then remembered I had to reset the CMOS... duh!

OK, it works. Not so terribly exciting though... but worth it!!

It added a few features: "AMD Cool and Quiet (works!... but may have seen some instability when using it after OC-ing), Adjustment of CPU FSB (had this before, but now it actually saves/uses it), and even setting the voltage (RAM voltage from 1.8V to 1.9V - used it!) and memory timings (same as original)."

It also allows disabling of the on-board GPU when another one is plugged-in... nice little feature!

Still lacks any kind of REAL control over RAM timing though... just very basics as OEM BIOS 3-speeds to choose from, or automatic.

(Note: Some "OEM" settings/options were accessed with a CTRL-F1... this does nothing now as all options are always exposed)

Still lacks CPU multiplier... BUMMER!!

Bought that 5000+ Black Edition, and not able to fully utilize it. Was able to squeeze out about 3GHz though, with Clock of 230MHz, FSB mult. of 4 ("K8<->NB"), my 800MHz memory would only run reliably in the 667MHz setting. Shame, having CL2 memory running at CL5.... or worse.

Might still try to move back to FSB mult. of 5 - giving me a FSB of 1150MHz... any thoughts? (remember, I'm new at this modded BIOS thing... so any help is good help!)

Original 1.12 and Gateway's latest 1.14 attached... in case anyone wants to take a look]]> <![CDATA[ECS C51GM-M V:1.0]]> https://www.bios-mods.com/forum/Thread-ECS-C51GM-M-V-1-0 Fri, 09 Jul 2010 11:12:09 -0400 MrTangoWhisky]]> https://www.bios-mods.com/forum/Thread-ECS-C51GM-M-V-1-0 here
I just tried to modify a bit but I think there is a big possibility to get even more of it!
It would be nice if someone could unlock evrything and update the roms to the most recent version. I actually run an 65W X2 Phenom II in it as an *unknown procesor* during bootup but Windows recognizes it as a 240 and I can unlock the other two cores!!
I'm not getting further as I wanted to, so please help me...]]> here
I just tried to modify a bit but I think there is a big possibility to get even more of it!
It would be nice if someone could unlock evrything and update the roms to the most recent version. I actually run an 65W X2 Phenom II in it as an *unknown procesor* during bootup but Windows recognizes it as a 240 and I can unlock the other two cores!!
I'm not getting further as I wanted to, so please help me...]]> <![CDATA[EliteGroup (ECS) AMD690GM-M2 REV]]> https://www.bios-mods.com/forum/Thread-EliteGroup-ECS-AMD690GM-M2-REV Mon, 10 Aug 2009 04:07:26 -0400 computerwis]]> https://www.bios-mods.com/forum/Thread-EliteGroup-ECS-AMD690GM-M2-REV

Unlocked Award Bios
Uses HP 2.1 SLIC
Phoenix-Award v6.00PG
Download link - http://rapidshare.com/files/263430581/6GM210M.rar.html]]>

Unlocked Award Bios
Uses HP 2.1 SLIC
Phoenix-Award v6.00PG
Download link - http://rapidshare.com/files/263430581/6GM210M.rar.html]]>