Bios Mods -The Best BIOS Update and Modification Source

Full Version: Gigabyte GA-P31-DS3L: Xeon Support
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3
@1234s282

Hi!

I have exact the same problem as delidded had except I have Gigabyte GA-P31-DS3L with F9 BIOS.
[Image: 1k9n.jpg]


Motherboard: Gigabyte P31-DS3L rev 1.1 (uses an Award bios) F9 BIOS
Code:
http://www.gigabyte.com/products/product-page.aspx?pid=2615#bios

Processor: Xeon E5440 (SLBBJ revision E0)
[Image: 3tio.jpg]

Could you please make F9 BIOS for GA-P31-DS3L with Socket 771 microcodes?

Thank you in advance.
Hi

I made this a separate post as it is for a different motherboard. Here is the F9 BIOS For Your motherboard containing all the Socket 771 microcodes.

[Image: tbqfpz3iceg74zcfg.jpg]

Flash at your own risk! Good luck!

Code:
http://www.mediafire.com/download/c1xtufj6wdw9iyt

Regards
Admin
(01-16-2014, 12:15 AM)1234s282 Wrote: [ -> ]Hi

I made this a separate post as it is for a different motherboard. Here is the F9 BIOS For Your motherboard containing all the Socket 771 microcodes.

[Image: tbqfpz3iceg74zcfg.jpg]

Flash at your own risk! Good luck!

Code:
http://www.mediafire.com/download/c1xtufj6wdw9iyt

Regards
Admin

Thank you for your answer, and effort.

I managed to make BIOS with microcode for my CPU E5440 by inserting only cpu0001067a_plat00000044_ver00000a0b_date20100928.bin microcodes. Procedure allowed me to do that and CPU is recognized now.
Please post your successful mod to share with others! Smile
Hi.
Could you please make F10a BIOS for GA-P31-DS3L with Socket 771 microcodes?
My cpu is Xeon E 5440 (SLBBJ revision E0).

Motherboard: Gigabyte P31-DS3L rev 1.1 (uses an Award bios) F10a BIOS.

http://www.gigabyte.com/products/product...x?pid=2615&dl=#bios


Thank you in advance.
Did you try BIOS mod by genius239?
[Image: 2.jpg]
Thanks DeathBringer.I found the bios on the "genius" page, but I thought that it was only the original BIOS without modification to the 771.I will try it soon....
The board accepts the CPU right from the start without a bios modification it's booting windows and working fine. I would like to know if a bios mod is needed for full support or is this OK as it is.Thank you...
Post a screenshot of regedit with expanded key HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\0
And I need a screenshot of first (CPU) tab of CPU-Z with Xeon L5335 on this motherboard.
  • The message is too short. Please enter a message longer than 5 characters.
Pages: 1 2 3