hi, i have the same machine, the hp DC7700 converible minitower and i would like modd my bios because my core 2 duo E7500 run at 1,60ghz and no 2,93ghz. i would like change multiplier coefficient in the bios. can you help me please ?
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z.
It isn't microcode error. This verification is in the compressed part of the BIOS.
Sorry but I can't unpack it for modifying...
I've found interesting code in
HPBIOS.016 module (for BIOS v3.07). On error it set status number 0x16 (
1802-Processor Not Supported).
Code:
A9C5 pushad
A9C7 mov ax, 0E7h
A9CA call 0B780h
A9CD test bl, 1
A9D0 jnz 0xAA0Bh
A9D2 push 254Bh
A9D5 call 12A1h
A9D8 cmp ax, 2
A9DB ja 0A9FFh
A9DD mov ecx, 1A1h
A9E3 rdmsr
A9E5 bt eax, 12h
A9EA jnb 0AA0Bh
A9EC mov dx, 0FA0Ch
A9EF in eax, dx
A9F1 xor eax, 80000h
A9F7 test eax, 80000h
A9FD jnz 0xAA0Bh
A9FF mov bx, 16h
AA02 call 0FFFFh:7618h
AA07 cli
AA08 hlt
AA09 jmp 0AA07h
AA0B popad
AA0D retn
Bad news that BIOS has a digital sing and can't be modified.
chris89
Please check: can you downgrade to BIOS v1.15? It hasn't a digital sing.
Now I can patch the code, but I can't fix CRC
(12-19-2016, 06:29 AM)DeathBringer Wrote: [ -> ]chris89
Please check: can you downgrade to BIOS v1.15? It hasn't a digital sing.
Now I can patch the code, but I can't fix CRC
So its the same with the dc7600 bios, can you look ?
http://h20566.www2.hp.com/hpsc/swd/publi...id=1110575&swItemId=ir_73174_2&swEnvOid=181#tab2
http://h20566.www2.hp.com/hpsc/swd/publi...id=1110575&swItemId=PSG_I23450_108542&swEnvOid=181
Current bios on it is v1.06, but i would like to get at least that v1.54 in there, with support for Cpu´s too, or its just not worth keeping :-P
Chipset is 945G, so the board could at least support most 65Nm dual-cores @1066Mhz