(09-14-2015, 05:27 PM)Sml6397 Wrote: [ -> ]What are the EXACT file names of both the flashing utility and the BIOS image you are attempting to flash?
so there is BIOS.wph and phlash16.exe
Try using the following command:
phlash16 /P /MFG /C /X /B:BIOS.wph
With this command, you will not see the progression of the BIOS flash (the graphical output may be causing issues). The machine should reboot automatically. Wait at minimum 30-60 minutes if it does not (preferably longer).
Running the command now
Thanks for your help
No problem! Let me know if it works.
How long should it take until it restarts? I can keep it on for 8 hours long if you like?
I Will do
hope Windows 98 can remain reliable as ever
It should only take 5-10 minutes, 15 max. I would still leave it on for much longer to be sure it isn't lagging. If you can, leaving it on for a few hours would definitely rule out lagging, although it is unlikely that this would be an issue.
Version incompatibility is a very common issue.
Try running the WinPhlash utility.
Be sure that you do not have other programs running while using this program. You must be extra cautious when flashing the BIOS from Windows.