Microcodes in these BIOS are equal. Have you tried to run i7 on your laptop? Set BIOS setting Primary Display to PEG before install cpu without integrated graphics.
(09-02-2015, 09:13 AM)DeathBringer Wrote: [ -> ]Microcodes in these BIOS are equal. Have you tried to run i7 on your laptop? Set BIOS setting Primary Display to PEG before install cpu without integrated graphics.
Yes, tried it! Its turning on and off immediately. However did not tried to set the Primary Display thing. Will try and let you know the results.
Thank you for the tip!
Regards.
Unfortunately, there is no option like that in the BIOS!
Can we somehow change the K52JT BIOS ID to be the same as the K52JC BIOS? So i could flash that on my laptop?
This option in hidden tab
Chipset.
Chipset->North Bridge Configuration->Primary Display
In your BIOS default value is
SG(Switchable Graphics), you need change to
PEG(PCI Express Graphics).
Open your bios with
AMIBCP 4.55, find this option and change default value (Failsafe and Optimal). Save the bios and flash.
Then boot with old cpu, go to BIOS, and restore defaults. Then try new cpu.
Microcodes in
K52JC BIOS version 216
Code:
Offset Size Version CPUID
0x020060 0x0800 00000002 020655 (Arrandale stepping K0)
0x020860 0x1800 00000004 0106E5 (Clarksfield stepping B1)
0x022060 0x1C00 0000000C 020652 (Arrandale stepping C2)
0x023C60 0x1400 FFFF0008 020652 (Arrandale ES)
from 0x025060 to 0x028060 filled by 0xFF
Microcodes in
G73Jh BIOS version 213
Code:
Offset Size Version CPUID
0x020060 0x0800 00000001 020655 (Arrandale stepping K0)
0x020860 0x1C00 00000009 020652 (Arrandale stepping C2)
0x022460 0x1800 00000003 0106E5 (Clarksfield stepping B1)
0x023C60 0x1400 FFFF0008 020652 (Arrandale ES)
0x025060 0x1400 FFFF0012 020651 (Arrandale ES)
0x025460 0x1400 FFFF0008 020650 (Arrandale ES)
0x027860 0x0C00 FFFF0006 0106E3 (Clarksfield ES)
0x028460 0x3000 FFFF000D 0106E1 (Clarksfield ES)
0x02B460 0x2800 FFFF0007 0106F1 (Clarksfield ES)
0x02DC60 0x2C00 FFFF001F 0106E0 (Clarksfield ES)
0x030860 0x1400 FFFF0003 0106E0 (Clarksfield ES)
from 0x031c60 to 0x034C60 filled by 0xFF
You have newer microcodes than in
G73Jh BIOS.
If a trick with changing
Primary Display don't works then your motherboard is compatible with cpus with integrated graphics only.
Ok. Thank you for the info!
The problem is maybe the gpu settings in bios. Its not PEG. Its soldered on the motherboard. What settings should i choose? When i choose the PEG(PCI Express Graphics), the display is black. No output to external monitor neither.
