Hello Guys !
I have a Lenovo Yoga 2 11 Model 20332 (BayTrail-M) and need to put ac wlan in it.
My actual (newest) Bios is 92cn93ww from this
link
The original pci vendor id from my wlan is Broadcom 802.11n-Netzwerkadapter
PCI\VEN_14E4&DEV_4365&SUBSYS_061117AA&REV_01\4&1091746D&0&00E0
I need to install the new device from Intel® Dual Band Wireless-AC 7260 which has
PCI\VEN_8086&DEV_08B1&SUBSYS_40708086&REV_BB\4&24D28C66&0&00E1
(read and functional with an unlocked Toshiba PC)
Is there any chance to do this without any hardware ?
greetings
zyklop
(11-07-2015, 03:01 AM)BDMaster Wrote: [ -> ]Use this tool run It as Admin and upload here the result file :
http://rghost.net/658W4s2SF
http://rghost.net/53128665
Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too
let me know
Regards
Hello, hier is the
results.rar
My Mcafee would not allow me to use the universal Backup Tool, also when i try to make it ignore !
He finds a Trojan.
I do not have Aida (cracked) where do i become it ?!
I think, i had a look at the results.rar, there is maybe a locked area where i will need a hardware flasher, is it correct ?!
Thanks a lot
zyklop
Hi mate,
It's aFalse Positive as that tool read the Protect Hi-Mem !
Regards
(11-07-2015, 11:08 AM)BDMaster Wrote: [ -> ]Hi mate,
It's aFalse Positive as that tool read the Protect Hi-Mem !
Regards
Hi,
i disabled my virusscanner and he says "can not identify bios !!" , while run as administrator !
what can i do now ?
thanks
zyklop
Doesn't matter my friend as I got result and It's enough !
Your Eeprom Chip is Write Protected so only the Tools (SPI PGM + Clip) can do
this job . . . look here :
https://www.bios-mods.com/forum/Thread-R...6#pid83126
let me know
Regards
P.S. if You will get the Tools then I will help You to make the job !
(11-07-2015, 03:16 PM)BDMaster Wrote: [ -> ]Doesn't matter my friend as I got result and It's enough !
Your Eeprom Chip is Write Protected so only the Tools (SPI PGM + Clip) can do
this job . . . look here :
https://www.bios-mods.com/forum/Thread-R...6#pid83126
let me know
Regards
P.S. if You will get the Tools then I will help You to make the job !
hello,
so i ordered now this tools:
Burner
CLIP
hope this will do this Job !
The only thing, it comes from china....... maybe it will not arrive before 3-4 weeks !
Is there any TUT for soldering/wirering Programmer to Clip ?
Or is it only the 8 pins of PROM longening to the right socket-pins of Programmer ?
Which Software do i use for Dumping/writing ?
If I have a Dump then, you can "anti-Whitelist" and maybe "anti-Hidden-Options" it ?
Thanks
zyklop
Hi mate,
It will came with the tools anyway I will send to You too !
Regards
Hy,
i downloaded software anyway, also with english language-pack.
it´s not the first eprommer i use, have also an E3 and Teensy++ 2.0, but this will not work, i think.
Not the right software script´s and also not the right clip.
Don´t want to solder on my new Netbook.
I only have a question about the direction of the chip (wired to the clip)
i saw a video on youtube, but he puts the chip in other direction (the nut for pin 1) as on the little picture of the prom-program.
Shall i do it like picture or like video ?
thanks
zyklop
Hi mate,
May be You are talking about the SPI PGM side
I can say that all equipment has to be aligned to Pin #1 from Eeprom Chip
(You find a little ball on sx head), looking on MoBo is wrote as normal !
Then Clip, cable and SPI PGM has to follow Pin #1 in different way It will
not wrok !
Regards
P.S. Let me see the video please !