Request 92cn93ww Lenovo yoga 2 11 Model 20332 whitelist remove

[zyklop1]

Hello Guys !

I have a Lenovo Yoga 2 11 Model 20332 (BayTrail-M) and need to put ac wlan in it.

My actual (newest) Bios is 92cn93ww from this link
The original pci vendor id from my wlan is Broadcom 802.11n-Netzwerkadapter

PCI\VEN_14E4&DEV_4365&SUBSYS_061117AA&REV_01\4&1091746D&0&00E0



I need to install the new device from Intel® Dual Band Wireless-AC 7260 which has

PCI\VEN_8086&DEV_08B1&SUBSYS_40708086&REV_BB\4&24D28C66&0&00E1
(read and functional with an unlocked Toshiba PC)

Is there any chance to do this without any hardware ?

greetings

zyklop

[BDMaster]

Use this tool run It as Admin and upload here the result file :

http://rghost.net/658W4s2SF

http://rghost.net/53128665

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

[zyklop1]

Use this tool run It as Admin and upload here the result file :

http://rghost.net/658W4s2SF

http://rghost.net/53128665

Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too

let me know
Regards

Hello, hier is the results.rar
My Mcafee would not allow me to use the universal Backup Tool, also when i try to make it ignore !
He finds a Trojan.
I do not have Aida (cracked) where do i become it ?!

I think, i had a look at the results.rar, there is maybe a locked area where i will need a hardware flasher, is it correct ?!

Thanks a lot

zyklop

[BDMaster]

Hi mate,
It's aFalse Positive as that tool read the Protect Hi-Mem !
Regards

[zyklop1]

Hi mate,
It's aFalse Positive as that tool read the Protect Hi-Mem !
Regards

Hi,

i disabled my virusscanner and he says "can not identify bios !!" , while run as administrator  !

what can i do now ?

thanks


zyklop

[BDMaster]

Doesn't matter my friend as I got result and It's enough !

Your Eeprom Chip is Write Protected so only the Tools (SPI PGM + Clip) can do
this job . . . look here :

https://www.bios-mods.com/forum/Thread-R...6#pid83126

let me know
Regards

P.S. if You will get the Tools then I will help You to make the job !

[zyklop1]

Doesn't matter my friend as I got result and It's enough !

Your Eeprom Chip is Write Protected so only the Tools (SPI PGM + Clip) can do
this job . . . look here :

https://www.bios-mods.com/forum/Thread-R...6#pid83126

let me know
Regards

P.S. if You will get the Tools then I will help You to make the job !

hello,

so i ordered now this tools:

Burner
CLIP

hope this will do this Job !

The only thing, it comes from china....... maybe it will not arrive before 3-4 weeks  !
Is there any TUT for soldering/wirering Programmer to Clip ?
Or is it only the 8 pins of PROM longening to the right socket-pins of Programmer ?

Which Software do i use for Dumping/writing ?

If I have a Dump then, you can "anti-Whitelist" and maybe "anti-Hidden-Options" it ?

Thanks

zyklop

[BDMaster]

Hi mate,
It will came with the tools anyway I will send to You too !
Regards

[zyklop1]

Hy,

i downloaded software anyway, also with english language-pack.

it´s not the first eprommer i use, have also an E3 and Teensy++ 2.0, but this will not work, i think.
Not the right software script´s and also not the right clip.
Don´t want to solder on my new Netbook.

I only have a question about the direction of the chip (wired to the clip)
i saw a video on youtube, but he puts the chip in other direction (the nut for pin 1) as on the little picture of the prom-program.
Shall i do it like picture or like video ?

thanks

zyklop

[BDMaster]

Hi mate,
May be You are talking about the SPI PGM side
I can say that all equipment has to be aligned to Pin #1 from Eeprom Chip
(You find a little ball on sx head), looking on MoBo is wrote as normal !
Then Clip, cable and SPI PGM has to follow Pin #1 in different way It will
not wrok !
Regards

P.S. Let me see the video please !