(11-04-2019, 06:44 AM)genius239 Wrote: [ -> ] (11-03-2019, 11:34 AM)bazza2000 Wrote: [ -> ]OMG I was about to kill my 17r2 LOL an unlocked bios how awesome is this PLEASE PLEASE can you unlock mine for me .
i will very grateful ,
or a how to guide would be so useful i doubt im the the only 17 r2 user out that would find this so helpful
thank you
Out of interest I flashed one of the modded bios .
It has worked with no I'll effects . Apart from the service tag has changed .
Like said my 17 r2 is EOL anyway so happy to do testing
Hi~~guy
Try this modded.
http://katfile.com/a6u279g32kic/biosreg_17r2_1.bin.html
Thank you very much i will flash bios donation on it way
Hi mate, could you kindly make me a bios file to
enable NVME,Raid,all overclocking functions, everything that is
tested to work for this Alienware 17 R2
and is it possible for the system to support > 16gb memory ? now it only support 16, lets say 32 ?
Can my service tag remain ? as the system still has extended warranty.
Thanks so much!
(05-19-2019, 02:16 AM)Lost_N_BIOS Wrote: [ -> ]RAID is enabled on this system by default, once you load optimal defaults, however the Individual options for RAID0-10 are disabled.
So yes, it can be enabled Send me a dump of your BIOS region via FPT - Check BIOS main page and see if ME FW version is shown, if not then download HWINFO64 and on the large window on left side, expand motherboard and find ME area, inside that get the ME Firmware version. Once you have that, go to this thread and in the section "C" download the matching ME System Tools Package (ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
https://www.win-raid.com/t596f39-Intel-Management-Engine-Drivers-Firmware-amp-System-Tools.html
Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder. Select that Win folder, hold shift and press right click, choose open command window here (Not power shell). At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin
If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)
https://www.windowscentral.com/how-add-c...ors-update
https://www.windowscentral.com/add-open-...windows-10
https://www.laptopmag.com/articles/open-...privileges
Discovered this thread quite late. I'm using Alienware 15R1. Could you help me unlock the bios? Thank you so much!
Hi,
Just wanted to say thank you for unlocking Aptio V BIOSes for people. I could have done it myself with a few tools on an Aptio IV system, tools are publicly available out there, but none for V.
I currently own a 17 R2 running the relatively new A12 bios, with mitigations a for a few exploits on Haswell chips. could it be unlocked ?
A12 bios file extracted from my computer :
https://drive.google.com/open?id=1LoJNIU...MLMQCSqGUi
Thanks in advance
Huge edit incoming :
I actually found out about AMIBCP V5 and started tinkering around. Was able to toggle a few things on, but i'm pretty stuck on the "invisible menu" thing. the whole "setup" part of the "main" folder doesn't show up after flashing. tried using a hex editor to find the relevant toggles, only to fail miserably. Will update as I find my way.
Is this article still valid? I have an Alienware 17r2 2015 and programmer.
I got biosreg.bin your way. I hope to help me unlock.
Sorry, my English is not very good. I have to use a translator
[attachment = 18662]
(05-19-2019, 02:16 AM)Lost_N_BIOS Wrote: [ -> ]RAID is enabled on this system by default, once you load optimal defaults, however the Individual options for RAID0-10 are disabled.
So yes, it can be enabled Send me a dump of your BIOS region via FPT - Check BIOS main page and see if ME FW version is shown, if not then download HWINFO64 and on the large window on left side, expand motherboard and find ME area, inside that get the ME Firmware version. Once you have that, go to this thread and in the section "C" download the matching ME System Tools Package (ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
https://www.win-raid.com/t596f39-Intel-Management-Engine-Drivers-Firmware-amp-System-Tools.html
Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder. Select that Win folder, hold shift and press right click, choose open command window here (Not power shell). At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin
If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)
https://www.windowscentral.com/how-add-c...ors-update
https://www.windowscentral.com/add-open-...windows-10
https://www.laptopmag.com/articles/open-...privileges
Please ignore the last reply, it's my fault.
Is this article still valid? I have an Alienware 17r2 2015 and programmer.
I got biosreg.bin your way. I hope to help me unlock.
Sorry, my English is not very good. I have to use a translator
[
attachment=18663]
Would you be able to unlock my bios. I have a 17 r3. If you can't I understand. Anything you could unlock would be helpful.
Thank you.
[
attachment=18888]Hi guys, I kindly ask, can someone please help unlock my Bios? I know the topic is old, but I need it.
Model: 17 R2