Bios Mods -The Best BIOS Update and Modification Source

Hi there good people and Happy New Year,

looking for a BIOS mod request of bios of Asus P5LD2 that will support Wolfdale C0, M0 Intel® Core™ 2 Duo Processor E8500. I am attaching the bios chip content.

The board actually starts with this CPU but I am getting error: Intel CPU ucode loading error Press f1 to resume. If You press f1 nothing happens, if You pressed dell before the error when you press f1 i can get into the bios and the CPU is recognized.
I tried to modify the bios using mmtool and upgraded all microcodes and added the microcode for cpu E8500 but the error remains. What i am doing wrong?

Tell sSpec of your E8500.
Why you didn't add microcode for CPUID=0x1067A?

(01-06-2020, 03:50 PM)DeathBringer Wrote: [ -> ]Tell sSpec of your E8500.
Why you didn't add microcode for CPUID=0x1067A?

I was thinking only 1067 was enough i will add 1067a also will it do?

Tell sSpec or make a photo of CPU top.

(01-06-2020, 03:56 PM)DeathBringer Wrote: [ -> ]Tell sSpec or make a photo of CPU top.

SLB9K has CPUID=0x1067A

(01-06-2020, 04:06 PM)DeathBringer Wrote: [ -> ]SLB9K has CPUID=0x1067A

ok i will replace 1067 with 1067a because there is no space, i will try in a few minutes

(01-06-2020, 04:10 PM)lupy Wrote: [ -> ]
(01-06-2020, 04:06 PM)DeathBringer Wrote: [ -> ]SLB9K has CPUID=0x1067A

ok i will replace 1067 with 1067a because there is no space, i will try in a few minutes

No ucode error, but now the bios is not recognizing the speed and cores

Can you boot Windows with new CPU?
Try to use cpu0001067a_plat00000011_ver00000a0b_date20100928.bin

(01-06-2020, 04:33 PM)DeathBringer Wrote: [ -> ]Can you boot Windows with new CPU?

no, it freezes after post

(01-06-2020, 04:33 PM)DeathBringer Wrote: [ -> ]Try to use cpu0001067a_plat00000011_ver00000a0b_date20100928.bin

Same thing with the suggested bin, could it be faulty cpu?