07-25-2021, 01:01 PM
07-25-2021, 08:03 PM
@cronyx76
Make a bios dump with this tool then attach.(run dump.bat as administrator)
I'll edit it.
edit
=========
I forgot to say ,only i7-10875h can overclocking memory freq more than 2933mhz ,others will be locked at ddr4 2933 by imc(Integrated Memory Controller).
So ,xmp feature is useless for you.
Make a bios dump with this tool then attach.(run dump.bat as administrator)
I'll edit it.
edit
=========
I forgot to say ,only i7-10875h can overclocking memory freq more than 2933mhz ,others will be locked at ddr4 2933 by imc(Integrated Memory Controller).
So ,xmp feature is useless for you.
07-26-2021, 05:20 AM
(07-25-2021, 08:03 PM)genius239 Wrote: [ -> ]@cronyx76
Make a bios dump with this tool then attach.(run dump.bat as administrator)
I'll edit it.
edit
=========
I forgot to say ,only i7-10875h can overclocking memory freq more than 2933mhz ,others will be locked at ddr4 2933 by imc(Integrated Memory Controller).
So ,xmp feature is useless for you.
For FX506LI
07-26-2021, 06:28 AM
@cronyx76
Your mod was done ,please check your PM.
Your mod was done ,please check your PM.
08-31-2021, 07:33 AM
Hello! Basically just want an unlocked BIOS so I can use the throttlestopper to undervolt my cpu since this is a new laptop and it gets pretty hot and from my knowledge I can make it significantly undervolted while achieving slightly less performance, which I'm okay with. Thank you in advance. Cheers.
08-31-2021, 08:29 PM
@DMC_STALIN
I can help you out to edit this bios and unlock most of useful options in the bios. And i would tell how to activate Throttlestop ,but i will also tell you what a weird problems you will fact later.
1. Disable CFG Lock and Overclocking Lock in the bios ,then you could activate the Throttlestop. (Intel XTU need "XTU Interface" enable )
2. But on newer bios version , after the machine shut down then you turn it on again , option Overclocking Lock will be enable automatically then the Throttlestop would be unavailable again.
So ,it means that you need to re-set the CFG Lock and Overclocking Lock every boot up or re-boot to activate Throttlestop. I didn't know how to solve this issue yet.
3. Currently you could do a little undervolt under Advanced => Voltage Configuration.(It has maximum restiction at -80mv)
4. Before we start the bios modification ,please disable Bitlocker at first.
5. Please make a bios dump with this tool then attach this file.(Run dump.bat as administrator)
I can help you out to edit this bios and unlock most of useful options in the bios. And i would tell how to activate Throttlestop ,but i will also tell you what a weird problems you will fact later.
1. Disable CFG Lock and Overclocking Lock in the bios ,then you could activate the Throttlestop. (Intel XTU need "XTU Interface" enable )
2. But on newer bios version , after the machine shut down then you turn it on again , option Overclocking Lock will be enable automatically then the Throttlestop would be unavailable again.
So ,it means that you need to re-set the CFG Lock and Overclocking Lock every boot up or re-boot to activate Throttlestop. I didn't know how to solve this issue yet.
3. Currently you could do a little undervolt under Advanced => Voltage Configuration.(It has maximum restiction at -80mv)
4. Before we start the bios modification ,please disable Bitlocker at first.
5. Please make a bios dump with this tool then attach this file.(Run dump.bat as administrator)
09-01-2021, 12:20 PM
Hello!
Thank you very much for the quick reply.
That information about throttlestop is very useful. Did you mean going to "Advance>Voltage configuration" - inside the ThrottleStop application or somewhere in Windows?
And I am familiar with overclocking/undervolting on my main machine, so if this is the case I would just undervolt the CPU and the GPU a little bit in the BIOS itself.
"4. Before we start the bios modification ,please disable Bitlocker at first." - how and where do I do that, if you don't mind guiding me through this.
5. Here is the BAT Dump file as you requested:
Thank you very much for the quick reply.
That information about throttlestop is very useful. Did you mean going to "Advance>Voltage configuration" - inside the ThrottleStop application or somewhere in Windows?
And I am familiar with overclocking/undervolting on my main machine, so if this is the case I would just undervolt the CPU and the GPU a little bit in the BIOS itself.
"4. Before we start the bios modification ,please disable Bitlocker at first." - how and where do I do that, if you don't mind guiding me through this.
5. Here is the BAT Dump file as you requested:
09-01-2021, 12:29 PM
Was not able to attach the file here so here is the link to it on the Mega server:
https://mega.nz/file/4Ro0TA6L#7z0pRr3Sbx...yvU6W0uNWA
https://mega.nz/file/4Ro0TA6L#7z0pRr3Sbx...yvU6W0uNWA
09-01-2021, 12:32 PM
@DMC_STALIN
1. Advanced => Voltage Configuration is in the bios.
2. Please search how to disable Bitlocker thyself in the internet , im not a laptops user.
3. I can't see any files attached.
I will offline now ,it's 01:30 A.M. now.
1. Advanced => Voltage Configuration is in the bios.
2. Please search how to disable Bitlocker thyself in the internet , im not a laptops user.
3. I can't see any files attached.
I will offline now ,it's 01:30 A.M. now.
09-01-2021, 12:36 PM
No problem I will look it up and disable it myself.
I have attached a link with the dump file, I couldn't attach it here for some reason.
Have a goodnight, let me know if there is anything else I need to do whenever you come back online.
Cheers!
Here is the link to the Dump File: https://mega.nz/file/4Ro0TA6L#7z0pRr3Sbx...yvU6W0uNWA
I have attached a link with the dump file, I couldn't attach it here for some reason.
Have a goodnight, let me know if there is anything else I need to do whenever you come back online.
Cheers!
Here is the link to the Dump File: https://mega.nz/file/4Ro0TA6L#7z0pRr3Sbx...yvU6W0uNWA