I'm also concerned about the file, at one point, you were using a file that matched the name of the original .bin file, now it has changed.
Is that just because it's the ABIT bios you mentioned using?
Also, I tried opening the file in WinFlash just to see what it had to say, and it claimed it wasn't compatible.
Basically, I just want to make sure all is well before I attempt this.
---
Edit: Probably already obvious, but I have an Acer E380 running the official version of the bios RO1-CO, it's the correct board, and a revision 1, I believe, if it matters. (I have the stock X2 4400+, hoping to get it up to around, 2.8 at least, since my socket 939 AMD64 3700+ runs that on a stock cooler. Though, that CPU is a beastly overclocker, so I may not get that much out of this one.)
---
Edit: Btw, will this possibly help with any other issues, for example, my Logitech mouse, and GPU wouldn't work in this system, they should be fine, I pulled them from a working system, and placed them into this one, and neither worked.. ?
The mouse gives me some error, then reports as an unknown device, and the GPU, well, the system won't even post with it installed, it lights up for second(HD Light, etc,.), then powers down. (There is a slight chance I ESD'd it, but I'm generally very careful, so I don't know..)