Hi all,
Sorry not to have posted a reply, I've been very ill and haven't had the chance...
I managed to successfully flash my BIOS with the one that BusyKid made, I did it a while ago obviously so I can't remember the exact procedure, but I think I just renamed the SLIC'd BIOS to the same name as the original sony one, then put it in the folder replacing the sony one...
Maybe that didn't work the first time and I had to flash the original sony BIOS first...
But eventually it flashed. I was using the same version of BIOS as the original one before and after the SLIC process... so I dont think you need new version of the BIOS to SLIC it.. unless of course there is nowhere to insert the SLIC table or some other technical reason that is WAAAAY over my head...
I havent yet tested the Win7 install because my gf uses the laptop for university and has to use it a bit longer before I change it from vista to 7...
But as long as the SLIC table is in the BIOS I'm sure it will go fine!
Thanks a million!
I'll donate to the boards once I install the OS!
YOU GUYS ROCK!!!!
Maybe I spoke too soon... back then I had just flashed the BIOS... Tonight I tried to install Windows 7 and found that although it accepted the cert and key... the expiration was still there
I tried to reflash the bios and found that it wouldnt let me from phlash161700 no matter what switches I tried....
Can anyone help me with this please
Hi,
Here are the screen shots from the dump tool...
http://members.optusnet.com.au/ebaypix/SLICTool/
I have saved an image of the laptop in both windows vista and 7 so I am switching between the two to test different things...
I have found I am able to use the tool which came with the original sony bios (winphlash) but only by using the executable "WBFlash" which is in the same folder.
I have an older version of the BIOS and can flash between the two, but the new one which was modded by BusyKid doesn't seem to activate
Going to go back to windows 7 and try again... thanks for your help
Seems theres an error with the SLIC marker , il have a look at this for you now!
Regards
Admin
Here you go , i used Sony Vaio 2.1 SLIC + Certificate Included:-
1. Copy and paste ******.XRM-MS certificate file into C-Drive.
2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.
3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.
4. After receiving the message that the license was installed successfully, type at the command prompt: slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.
5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.
http://dl.dropbox.com/u/747181/Sony%20VA...34s282.zip
Flash at your own risk!
Please Report Back With Whether It Worked Or Not!
Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work
Regards
Admin
You're a legend
It worked!
I now just need to find a link to donate some dosh to you guys for your awesome work!
Thank you sosososo much!
P.S. This updated bios is a newer version than the one I had previously found... and it's fixed my booting off USB flash drives too! So thanks again!
Now I can install Win7 from my USB key which seems to be at least five times faster than off a dvd!
Link found! (top of home page)..
Donated!
Thanks again!