Bios Mods -The Best BIOS Update and Modification Source

I haven't done any intensive testing on my system with my configuration.

I use AS SSD Benchmark and ran a few benchmark tests with the RST 11.2.0.1006
drivers and the performance scores are around about the same for me as I was
geting with the RST 11.1.0.1006 drivers.

Here is a AS SSD Benchmark performance screenshot of my 2x256GB C300's in
RAID0 on the Intel SATA II controller and using the RST 11.2.0.1006 drivers.

[attachment=4099]

Obviously it's best to use the Intel SATA II controller that our board has with SSD
drives in RAID0 because the Marvell 91xx SATA 6G Controller can't handle the
bandwidth when in RAID0 and you actually get a lot slower performance.

I have seen my performance scores a bit better than this when
there is less data on the drive because the more free space
you have on your SSD, the faster it is.

I bet if I where to upgrade my system, new board with a proper
Intel SATA III 6Gb/s controller, I would probably see even higher
performance scores than this with the same SSDs in RAID0.

I have my SSD RAID0 configured with two partitions.

First Boot Windows partition: 100GB and a second partition: 376GB.

(06-25-2012, 12:15 PM)sinders Wrote: [ -> ]Over at Station Drivers people have commented the RST 11.2.0.1006 drivers are slower than
the previous RST releases whilst some people are finding them faster for them.

I have the RST 11.2.0.1006 driver release installed on my Windows 7 and they seem
to perform just as good as the previous releases.

I have my Windows 7 configured in RAID0 with a pair of Crucial RealSSD C300 256GB drives.

Placebo effect rules...

Here is my Rampage III Extreme 1601 BIOS mod same as in this thread with
the Intel Option ROM updated to the newly released version 11.2.0.1527.

My Rampage III Extreme 1601 BIOS:

1. Intel Option ROM updated to v11.2.0.1527
2. JMicron Option ROM updated to v1.07.28
3. Marvell Option ROM updated to (BIOS) v1.0.0.1033 / (FW) v2.2.0.1125

(06-29-2012, 11:46 AM)sinders Wrote: [ -> ]Here is my Rampage III Extreme 1601 BIOS mod same as in this thread with
the Intel Option ROM updated to the newly released version 11.2.0.1527.

My Rampage III Extreme 1601 BIOS:

1. Intel Option ROM updated to v11.2.0.1527
2. JMicron Option ROM updated to v1.07.28
3. Marvell Option ROM updated to (BIOS) v1.0.0.1029 / (FW) v2.2.0.1113

Hey thanks sinders for the new bios. Quick question, do you have the files necessary for Marvell bios 1.0.0.1033? Does 1033 have some bugs? Or is 1029 just better? Thanks again...

EDIT: Actually I should just ask if its safe to downgrade, or will the flashing process detect the newer orom and skip the Marvel update? lol

SkOrPn

SkOrPn, Sorry my mistake. It's just a post typo.

My Rampage III Extreme 1601 BIOS mods contains Marvell Option ROM (BIOS) v1.0.0.1033 / (FW) v2.2.0.1125

(06-29-2012, 01:45 PM)sinders Wrote: [ -> ]SkOrPn, Sorry my mistake. It's just a post typo.

My Rampage III Extreme 1601 BIOS mods contains Marvell Option ROM (BIOS) v1.0.0.1033 / (FW) v2.2.0.1125

Oh ok cool enough. All the more reason to get to testing lol...

(06-29-2012, 11:46 AM)sinders Wrote: [ -> ]Here is my Rampage III Extreme 1601 BIOS mod same as in this thread with
the Intel Option ROM updated to the newly released version 11.2.0.1527.

My Rampage III Extreme 1601 BIOS:

1. Intel Option ROM updated to v11.2.0.1527
2. JMicron Option ROM updated to v1.07.28
3. Marvell Option ROM updated to (BIOS) v1.0.0.1033 / (FW) v2.2.0.1125

Nicely done, Sinders! Where did you find Intel OROM v11.2.0.1527 ? Can you post a link please? Thanks!

You can find the new Intel OROM on the Win-Lite Forum thanks to Fernando and btester.

Thanks! Much appreciated!

(06-30-2012, 04:28 AM)ZioGTS Wrote: [ -> ]Thanks! Much appreciated!

Thanks it works great! I hope you will contine to update for us. When intel updates the RST driver for trim in raid 0 with the full 11.5 it will be nice to update the rom too and get it working.

thanks again.