UNLOCK TE11HC BIOS INSYDE V 2.21
unlock BIOS Insyde TE 11HC 2.21 urgentt pls
EDIT:
• Model: Packard Bell EasyNote TE11HC
• BIOS Version: Insyde 2.21
Well i flashed it, after shaking like i would have seen a ghost, and it worked.
thank you so much
(12-28-2014, 04:51 PM)BDMaster Wrote: [ -> ] (12-28-2014, 01:26 PM)Bsod Wrote: [ -> ]Well i flashed it, after shaking like i would have seen a ghost, and it worked.
thank you so much
Yes I know as mine 
You're Welcome
So were can i change primary graphics card (to Nvidia as default), or oc it (cpu)?
Hi, i may have put this in the wrong place in the forum, ifthere is a right place, could a MOD move it for me please.
Update: I have managed to change the logo with Phoenix tool. Since im on a roll, how do i change the serial and uuid and manufaturer in the bios
Hi All,
My Acer 5750g MB failed so i bought a used broken screen packard bell laptop (easynote te11hc) and put the board from the PB into the Acer chassis as it is nicer look.
I mostly just want the logo changed to acer instead of packard bell when it boots (for aesthetics) but the unlocked options would be great as i had it on the acer. I used ezh20 to modify try modify the file but i cant find the .fd file in the firmware download from packard bell after extracting and the backed up firmware gives me and EC error when i try flash it after modifying it. I am very new at this so it is probably me. I am also not sure what size to choose??
I do know there is a modified file for the acer V3-571 but i am still worried i break the firmware file and brick my laptop so someone who knows what they are doing is preferable before i brick this board.
Already modded acer v3-71 file
http://rghost.ru/56905038
Please could you help
Original file from Packard bell
http://global-download.packardbell.com/G...C=EMEA_27P
Backed up bios file
http://1drv.ms/19gMoZI
http://1drv.ms/19gMsZg
Thank you for the help
Update: I have managed to change the logo with Phoenix tool. Since im on a roll, how do i change the serial and uuid and manufaturer in the bios. may also need to add SLIC for my oem software to work. Any help is appreciated.
I tried modding the pre modded acer v3-571 .fd file. I changed the logo to the acer on and then flashed the modded file via the FN+ESC method. It flashes but the packard bell logo remains.
Please could someone assist in changing the logo to Acer in the firmware so it forces the acer logo and not the PB logo
Thanks
(03-24-2015, 04:46 AM)tyrons Wrote: [ -> ]Hi All,
My Acer 5750g MB failed so i bought a used broken screen packard bell laptop (easynote te11hc) and put the board from the PB into the Acer chassis as it is nicer look.
I mostly just want the logo changed to acer instead of packard bell when it boots (for aesthetics) but the unlocked options would be great as i had it on the acer. I used ezh20 to modify try modify the file but i cant find the .fd file in the firmware download from packard bell after extracting and the backed up firmware gives me and EC error when i try flash it after modifying it. I am very new at this so it is probably me. I am also not sure what size to choose??
I do know there is a modified file for the acer V3-571 but i am still worried i break the firmware file and brick my laptop so someone who knows what they are doing is preferable before i brick this board.
Already modded acer v3-71 file
http://rghost.ru/56905038
Please could you help
Original file from Packard bell
http://global-download.packardbell.com/G...C=EMEA_27P
Backed up bios file
http://1drv.ms/19gMoZI
http://1drv.ms/19gMsZg
Thank you for the help
Be easest !
Laptop to modify Bios = Acer Aspire V3-571 - G
1) Logo file You want to introduce (replace to original) whichi is ?
2)Logo Original to replace which is ?
3) Bios version to modify (v.2.21) ?
Then Use this tool run It as Amin and upload the result file here :
http://rghost.net/7GBZt7FVt
let me know
Regards
)