do you have al what you need for that? i see lot 201 Errors in generated screenshots.
This error is about FPT version not useful for Chipset !
Now We have to see if Sleep Bug is Activate yet !
So put your laptop into Sleep Mode (just close the Lid) and then Wacke-Up It
(reopen the Lid), then redo the result files (I hope last time !)
(09-12-2015, 01:22 PM)BDMaster Wrote: [ -> ]This error is about FPT version not useful for Chipset !
Now We have to see if Sleep Bug is Activate yet !
So put your laptop into Sleep Mode (just close the Lid) and then Wacke-Up It
(reopen the Lid), then redo the result files (I hope last time !)
I will enable sleep when lid close, i dont know if i have disabled it...
Then i will run backup tools again.
There is a problem. i dont see any optition to sleep laptop, only Shut down, hybernate and reboot.
When i cloesd lid, it hibernates. i have fresh installed Win, without drivers yet. that can be problem.
What now? install drivers, or is hybernate/reboot enaught?
(09-12-2015, 01:40 PM)BDMaster Wrote: [ -> ]Here You go for v.1.07 Menu Tabs Unlocked Mod :
http://rghost.net/6VZCPWmt2
Let me know
Regards
Now We will work for v.2.21 for You !
thanx. I will try to sleep that laptop. i will install drvers.
Will be 2.21 unlocked too?
//i cannot flash v.1.07 Menu Tabs Unlocked Mod, something SPI 2 error, or something that, i will take a picture with phone.
Acer Aspire E1-531 - G - E1-571 - V3-531 - G - V3-571 - G - TM-P253-E - M - PB EN TE11HC - PB EN TV44HC - GW NE56R - NE570
Same MoBo and same Bios
(09-12-2015, 01:45 PM)BDMaster Wrote: [ -> ]Ok try 1st the Recovery Bios option :
http://rghost.net/7t7CGs9bp
Let me know
Regards
In 1.xx version unlocked, i cannot flash bios.
Error 104: The 2 SPI flash devices do not have compatible command sets.
Do i need flash it first, or i can just flash 2.xx without 1.xx unlocked?
Now i tryed to flash 2.xx. unplugged AC, removed battery, hdd and wlan. Pressed PowerButton for 10secs.
Then pressed FN+ESC, and plugged AC in, then pushed power button, and relased, then relased FN+esc.
I hear 3 long beeps, and reboot. Bios was still 1.xx locked.
B.T.W. can i convert PackartBell TE11HC mainboard to E1-531 mainboard?
I can only change bois logo using ehzh2o.
Ok friend,
Flashed Bios Mod v.1.07 from DOS using the USB Stick like wrote into readme file ?
About Recovery Bios may be on your bios is been disabled as on UEFI so far all are gone !
To reflash your Bios We can use Sleep Bug if Actived but You didn't posted results files after
Sleep so I cannot say nothing !
Last and not least You have the SPI PGM so We can rewrite the Firmware into Eeprom Chip !
Give to me the Full Dump Firmware and I will modify to versio 2.21 !
Your lapotp has these two Eeprom Chips :
--- Flash Devices Found ---
W25Q32BV ID:0xEF4016 Size: 4096KB (32768Kb)
MX25L8005 ID:0xC22014 Size: 1024KB (8192Kb)
This is Bios Region
W25Q32BV ID:0xEF4016 Size: 4096KB (32768Kb)
This is Descriptor, ME
MX25L8005 ID:0xC22014 Size: 1024KB (8192Kb)
Please give both (for my collection) !!!
Let me know
Error 104 = disalignment into fparts.txt file (Eeprom Chips Specifications)
so You have to check both this rows :
W25Q32BV, 0xEF4016, 0x2000000, 0x1000, 0x20, 64, 0, 0xc7, 80000
MX25L8005, 0xC22014, 0x800000, 0x1000, 0x20, 64, 0, 0x60, 80000
They have to get same command 0xc7 or 0x60 so try before to change both to
0xc7 and then if not work into 0x60
W25Q32BV, 0xEF4016, 0x2000000, 0x1000, 0x20, 64, 0, 0xc7, 80000
MX25L8005, 0xC22014, 0x800000, 0x1000, 0x20, 64, 0, 0xc7, 80000
or
W25Q32BV, 0xEF4016, 0x2000000, 0x1000, 0x20, 64, 0, 0x60, 80000
MX25L8005, 0xC22014, 0x800000, 0x1000, 0x20, 64, 0, 0x60, 80000
Let me know
Regards