Bios Mods -The Best BIOS Update and Modification Source

(09-13-2015, 07:40 AM)BDMaster Wrote: [ -> ]Some MoBo can use these Eeprom Chips :

ACER ASPIRE E1-571
Motherboard - Q5WVH LA-7912P Rev 1.0
Cpu - I3-2328M 2.2GHz
Spi Flash - Cfeon Q32B-104HIP - (EN25Q32B), MX25L8006E

Слито лично мной ! BIOS v2.04 + КВС

I will try to read this chips, but i need to find my BIOS Programmer.

Ok Gouster !

(09-13-2015, 10:01 AM)BDMaster Wrote: [ -> ]Ok Gouster !

I lent my hot air gun to my friend.
I will get it next week.

As yet thanx. I will contat You.

Hello,
Packard Bell TE11HC-700k
1.7 3620QM processor 
8gb ram
Nvidia 710m gpu 
Bios/Bios Version: Insyde Corp. V2.15

I only want you to unlock advanced mode of my bios to plug an external GPU.

Can't thank enough if someone do such thing for me,
I'm a highschool student so that i can't donate (don't have a credit card) but i will try to do.

Hello!
Run this tool as Admin and upload results
http://rghost.net/7ktxKKbNs

Oh, 
I thought i already uploaded it, sorry my fault.

Here we go https://www.sendspace.com/file/cgt5ha.

Thanks for you attention.

In Peace,

Curio

Edit Question:

I want to learn if i disable my Nvidia Graphics Card,will my system be bricked?
Is it hundred percent? or only a possibility? I should know this because i want to disable my gpu and
plug an external gpu to boost my graphics.

If you disable one of GPUs so you will brick laptop 100%.
Laptop can be recovered using HW SPI Programmer only!!!
Do you want to continue???

Hey Sir,

Firstly i want to thank for your attention.

I asked some of fellows who did egpu thing before and they said me that you will not disable your Graphics Card from Advanced Menu.
The program (named egpu) will mostly throttle the dgpu so there will be enough bandwith for egpu to flow. (They told me this is the trick of it.)

Anyway, i want to continue if it's possible. I only want advanced menu to access wifi ports of my computer if there will be no problem such as bricking or more fatal ones.

Set your laptop to suspended mode then wake up it after few seconds.
Run tool as Admin again and look at result81.png.
Do you see red text (error 28) here?

Yes I saw it,
https://www.sendspace.com/file/8yqbrm it's over there,

so what's up with that?