11-29-2017, 07:23 PM
(11-29-2017, 06:48 PM)Henrique Wrote: [ -> ]I would like to request the bios unlock for my laptop:Hi
Acer E5 571
Your mod completed. Check PM
This mod for this notebook ONLY !!!
(11-29-2017, 06:48 PM)Henrique Wrote: [ -> ]I would like to request the bios unlock for my laptop:Hi
Acer E5 571
(02-25-2018, 11:39 PM)eletrofss Wrote: [ -> ]Hello, first i'd like to congratulate all of you smart people out there, good work, i learned a lot around here.Hi
Second, i'd like the adv menu mode in order to troubleshoot a problem with the egpu compatibility (i've soldered a 1x pcie port in the side of the notebook then i run the pcie signal trough an IDE cable to keep the same distance between the differential pins to solder to a scratched wireless mpcie board. I had a toshiba once that had two mpcie's, the other one was outside in a ribbon and easily solderable because there was no mpcie connector in the board, i used this egpu in that board, i know it works and it should be a software problem in the new laptop. Plus i like having control over my sh1t. Thank you.
(02-26-2018, 02:43 AM)Dudu2002 Wrote: [ -> ](02-25-2018, 11:39 PM)eletrofss Wrote: [ -> ]Hello, first i'd like to congratulate all of you smart people out there, good work, i learned a lot around here.Hi
Second, i'd like the adv menu mode in order to troubleshoot a problem with the egpu compatibility (i've soldered a 1x pcie port in the side of the notebook then i run the pcie signal trough an IDE cable to keep the same distance between the differential pins to solder to a scratched wireless mpcie board. I had a toshiba once that had two mpcie's, the other one was outside in a ribbon and easily solderable because there was no mpcie connector in the board, i used this egpu in that board, i know it works and it should be a software problem in the new laptop. Plus i like having control over my sh1t. Thank you.
Your mod completed.
Check PM
This modfor this notebook ONLY !!!
(02-26-2018, 12:07 PM)eletrofss Wrote: [ -> ]Thanks, i was able to enable the egpu in the bios, plus i can enable pcie gen3 X1 wich offers me 1GB bandwidth to the video board, unclogging my 40% overclock ed watercooled gt520 need for bandwidth. Do you wanna see some photos?it may be useful to the users